Switching Upper And Lower Part Display; Display Mode Switching - Kenwood KRC-Z965 Instruction Manual

General features

Switching Upper and Lower Part Display

Switching the upper and lower part display.
1
Select the Display Type
Press the [DISP] button.
2
Enter Display Control mode
Press the [S.A] button.
"Display Control Mode On" is displayed.
3
Switch the Upper part display
Press the [FM] or [AM] button.
Switch the Lower part display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
4
Exit Display Control mode
Press the [S.A] button.
• The same information can't be displayed on the Upper part display
and lower part display.
• The Upper part display and Lower part display switching can be
selected when "Display Type A" is selected in <Display Mode
switching> (page 9).
• When "Display Type B" is selected the Lower part display content
is clock ON or OFF.
In Tuner source
Upper Part Display
Information
Program Service name or Frequency
Radio text
The Frequency is displayed during Program Service name
reception
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
Lower Part Display
Information
Spectrum Analyzer & Graphic
Spectrum Analyzer & Clock
Spectrum Analyzer
Radio text
Date
Clock & Graphic
In Tape source
Upper Part Display
Information
Play side & Tape counter
Play side & Tape running
Play side
— 10 —
Display
"BAND+ch+PS"
"R-TEXT"
Display
"S/ANA+GRAPHIC"
"S/ANA+CLOCK"
"S/ANA"
"R-TEXT"
"DATE"
"CLOCK+GRAPHIC"
Display
"SIDE+COUNTER"
"SIDE+RUNNING
"SIDE"