Changing The Country Using Tmc; Switching The Broadcast Station; Displaying Traffic Events On Your Route - Kenwood KNA-DV3200 Instruction Manual

Changing the country using TMC

1
2
If you move from a country with auto assignment office support into a country without while
"
message Outside coverage

Switching the broadcast station

1
2
• The system selects a station automatically when this setting is not set up by the user. The system also searches for
the station with the best signal, when the reception of the chosen station is getting weak.
• If no broadcast station is found or if there is no response from TMC when
"
message

Displaying traffic events on your route

1
2
Select
Select the desired country from the list.
"
will be displayed until you return to a country with support.
Select
Select the desired broadcast station from the list.
"/" "
No TMC station Searching...
Select
Traffic events on your route are displayed in sequence from the
current position.
Select
the map, or
information.
or .
: The Navigation System will automatically detect when you
pass through a national border and will change the TMC
service station to the current country.
: Manual setting can be performed to set the country whose
signal is to be received.
: Displays up to five previous suggestions.
: Displays the previous suggestions.
: Displays the next suggestions.
: Displays up to five of the next suggestions.
.
: Displays up to five previous suggestions.
: Displays the previous suggestions.
: Displays the next suggestions.
: Displays up to five of the next suggestions.
will be displayed.
.
to display the position of a traffic event on
to display details and further
is selected, the
has been selected, the
English 51