Kenwood KDV-MP6032U Instruction Manual page 42

Dvd receiver
Hide thumbs Also See for KDV-MP6032U:
Table of Contents

Advertisement

• This unit can play back MP3 files recorded in VBR
(variable bit rate).
• The maximum number of characters for folder and
file names is 25 characters; 128 characters for MP3/
WAV and 64 characters for WMA Tag information.
• This unit can recognize a total of 5 000 files and 250
folders (999 files per folder).
• The unit cannot recognize a USB mass storage class
device whose rating is other than 5 V and exceeds
500 mA.
• USB devices equipped with special functions such as
data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• This unit may not recognized a USB device connected
through a USB card reader.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of USB devices.
• For MPEG1/2 files: The maximum bit rate for video
signals (average) is 2 Mbps.
iPod
• Controllable iPod (connected through....):
USB input jack:
– iPod nano (1st & 2nd Generation)
– iPod video (5th Generation) *
* To watch the video with its audio, connect the iPod
using USB Audio and Video cable (not supplied).
• Update your iPod to the latest software version
before using it with this unit.
– You can check the software version of your iPod
under "About" in the "Setting" menu of the iPod.
– For details about updating your iPod, visit
<http://www.apple.com>.
42 | KDV-MP6032U
• While the unit is being turned on, the iPod is charged
through this unit.
• iPod shuffle and iPhone cannot be used with this
unit.
• You can control the iPod from this unit when
"KENWOOD" or " " appears on the iPod display after
connection.
• The song order displayed on the selection menu of
this unit may differ from that of the iPod.
• If playback is stopped, select a track from the
selection menu or press
the same track again.
• The text information may not be displayed correctly:
– Some characters such as accented letters cannot be
shown correctly on the display.
– Depends on the condition of communication
between the iPod and the unit.
• If the text information includes more than
16 characters, it scrolls on the display. This unit can
display up to 128 characters.
Notice:
When operating an iPod, some operations may not
be performed correctly or as intended. In this case,
visit the following Kenwood web site:
– For the USB connection:
<http://www.kenwood.com/i/kca-ip/>
Title assignment
• If you try to assign titles to more than 30 station
frequencies, "Name Full" appears. Delete unwanted
titles before assignment.
3
8
/
(BAND) to play back

Advertisement

Table of Contents
loading

Table of Contents