D-Link ANT24-0700 Install Manual page 5

ANT24-0700 Install Guide
A. Unscrew the magnetic base from the antenna.
B. Identify a mounting location. Use a pencil to mark the position
of the two holes using the stencil supplied with your mounting
kit.
C. Use a 5/16" drill bit to drill a hole in both marked locations.
D. Tap the plastic anchor gently into each of the holes using a
rubber mallet or hammer.
E. Use a screwdriver to secure the screws into the plastic
anchors.
F. Attach the magnetic base to the wall. Once the base is firmly
secure, attach the antenna to the base and then connect the
cable to your wireless device.
D-Link Systems, Inc.
Wall Mount
Antenna Installation
5