NEC MultiSync V322 User Manual page 28

OVER SCAN Some video formats may require different scanning modes in order to best display the image.
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
S-VIDEO inputs only
ON Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
OFF Image size stays within the display area. The whole image is displayed on the screen.
NOTE: When you use a computer with HDMI out, please set "OFF".
OPTION SETTING You can set this setting when option board accessory is connected to the monitor.
Please contact your supplier for detailed information about Option board slot accessories.
OPTION POWER Allow the monitor to supply power to Option board slot during power save mode or standby
mode.
AUDIO
(not adjustable)
INTERNAL PC The function is available for slot 2 type PC.
OFF WARNING If OPTION POWER is OFF, a warning message appears when monitor power is turned off.
Note: Warning message does not appear when monitor power is turned off by OFF TIMER
setting or SCHEDULE setting.
AUTO OFF Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save
mode.
START UP PC When ON is selected, connected PC start-up.
FORCE QUIT When ON is selected, it performs force-quit PC.
120Hz
(not adjustable)
TOUCH PANEL
(not adjustable)
RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
DEINTERLACE, COLOR SYSTEM, OVER SCAN, START UP PC in OPTION SETTING and
FORCE QUIT in OPTION SETTING.
FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: PICTURE MODE, VOLUME,
SCHEDULE SETTINGS, DATE & TIME, ASPECT in PIP, SUB INPUT in PIP, LANGUAGE,
LAN SETTING, TILE MATRIX MEM, OSD ROTATION, CHANGE SECURITY PASSWORD and
SECURITY.
English-26
ON
-
OFF
-
-
-
-