Getting Started; Included In This Package; Battery Installation; Battery Notice - VTech Peek at Me Bunny User Manual

INCLUDED IN THIS PACKAGE

- One VTech
®
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy,
and should be discarded for your child's safety.
NOTE: Please keep this instruction manual as it contains
important information.
Attention : pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d'emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw.
3. Install 2 new 'AA' batteries following the
diagram inside the battery box. (The use
of new alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten the screw to secure.

BATTERY NOTICE

• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
Peek At Me Bunny
TM