Operating Your Thermostat; Temporarily Changing The Program - Honeywell T8611M7065 Owner's Manual

Operating Your Thermostat

TEMPORARILY CHANGING THE PROGRAM

These features let you customize the program for
those times when someone comes home early, or you
are staying up late, or you plan to be out for the evening.
Changes made with these keys are active for one
program period and then are canceled.
Keep Current Temperature Through the Next Period
Press and release SKIP NEXT PERIOD key. The
name of the period to be skipped will flash in the display
until the start time of the skipped period. During the
skipped period, the display will flash TEMPORARY to
show that the programmed temperature for this period is
not being used.
To Go Back to the Temperature of the Previous
Program Period
Press and release CHANGE TO LAST PERIOD key.
The display will show the name of the previous period
and flash TEMPORARY until the next regularly scheduled
period starts.
To Temporarily Raise or Lower the Temperature for
the Current Period Only.
Press and hold the WARMER or COOLER key until
the desired temperature is reached. The display will flash
TEMPORARY until the next programmed time period
starts.
With the system switch in the AUTO poition, you can
alternate between heating and cooling by pressing and
holding down the PRESENT SETTING key. Use the
WARMER or COOLER key to adjust the temperature
setting for each mode.
If you change your mind.
Press and release RUN PROGRAM key to cancel any
of the temporary settings.
14 69-0819