Honeywell T8611 Owner's Manual page 17

Programmable heut pump thermostat
Table of Contents

Advertisement

Comfort temperature
the temperature
you want in the
morning and evening when you're
home.
Energy-saving
temperature
The lower (heating) or higher
[cooling) temperature
that lets you
be
oi heating and cooling
costs
when you're asleep or away. Also
called the setback (heating) or setup
(cooling) temperature.
Period key
Ona of the four kevs-WAKE.
LEAVE.
RETURN or SLEEP-that
you press
to check or program the Start time
and temperature
for a time period.
Preprogrammed
schedule
This is the schedule
programmed
into your thermostat
at the factory It
sets a night program that provides
energy savings if you don't set your
own program,
or if your personal
program is lost for any reason. The
program,
which
is the same for all
Status Lights-Lights
that show
system operating
mode.
ENRG SAV light (green)-This
light glows during the LEAVE and
SLEEP periods llocated on
therm&tat).
SYSTEM light (yellow)-This
light
glows whenever
the thermostat
is
calling for heating or cooling
(located on thermostai).
AUX HT light (green)-This
light
glows whenever
the thermostat
is
calling for operation
of the
backuo heater. Backuo iauxiliarv)
thermostai
system switch is in the
EM HT or SUPL HT position
(located on subbase). On some
systems it may also indicate the
need to switch to EM. HEAT or
SUPL Hi because of a problem
with the heat pump.
Sunday program
schedule
The schedule
of WAKE, LEAVE,
RETURN and SLEEP period start
times and temperatures
that you
program
to run on Sundays.
Time oeriod
heat ii more expensive
io oper&
heat ii more expensive
io oper&
One~df four program periods: WAKE,
LEAVE, RETURN and SLEEP
than the heat pump and typically
CHECK light (yellow)-Consult
than the heat pump and typically
your heat pump equipment
literature to determine
whether
this light is used and its meaning
is used only when the heat pump
is used only when the heat pump
(located on subbase).
EM HT or SUPL. HT light (red)-
This light
glows
whenever
the
is unable to handle the load
is unable to handle the load
(located on subbase).
(located on subbase).
davs of the week. is:
Program
The times and temperatures
you set
to define the comfort and energy
savings periods for each schedule
(weekdays,
Saturday, Sunday).
Recovery
The time when the thermostat
operates
the heating or cooling
equipment
to return the house from
the energy savings to the comfort
temperature.
The thermostat
starts
the recovery period early so the
house will be at the comfort setting
by the time you've chosen.
Saturday
program
schedule
The schedule
of WAKE, LEAVE,
RETURN
and
SLEEP
period
start
WAKE-The
time period when
available with the thermostat.
One
you want the house at a
comfortable
temperature
while
the family gets up and gets ready
period begins when the previous
to leave for work or school. This
is the only period that must
contain a time and temperature.
period ends.
LEAVE-The
time period
when
times and temperatures
that you
program to run on Saturdays.
Setback
Reducing
the!emperature
in the
house for a set period every day in
winter for energy savings. The lower
temperature
is the energy savings
temperature.
setup
Raising the temperature
in the house
for a set period every day in summer
for energy savings. The higher
temperature
is the energy savings
temperature.
Set point
The temperature
you set on the
thermostat. The thermostat
turns the
heating or cooling equipment
on and
off to maintain this temperature
at the
thermostat
location
until another
temperature
setting goes into effect.
29
you can set back (winter) or up
(summer) the temperature
for
energy savings because the
family is usually away from home.
RETURN-The
time period when
you want the house at a
comfortable
temperature
for
family activities in the evening
before bedtime.
SLEEP-The
time period when
you can set back (winier) or up
(summer) the temperature
for
energy savings because the
family is sleeping. Set it to stait at
your lamily's normal bedtime.
Often the SLEEP program
is set
only for the heating season so
family members can sleep cool in
?unmer.
Weekday program
schedule
The schedule of WAKE, LEAVE,
RETURN and SLEEP period start
times and temperatures
that you
program to run Monday throuqh
Friday

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents