Getting Started; Battery Installation; Battery Notice - VTech Learning Time Cuckoo Clock User Manual

GETTING STARTED

BATTERY INSTALLATION

1. I n s t a l l 3 n e w ' A A ' ( A M - 3 / L R 6 )
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
2. Replace the battery cover.
NOTES:
As this product features a growing virtual pet, there is a saving mode
available to allow you to save Chirpy's current growth status when the
battery is low. Please follow the instructions below to change batteries
without memory loss:
1. We do not recommend changing the batteries until
the "low battery" indicator appears on the screen
as all current data will otherwise be lost.
2. Once the "low battery" indicator appears, it will flash four times, and
then the LCD screen will go blank. This is your sign that the data
has been safely stored away. You can now change the batteries.
Do it as soon as possible to avoid memory loss.
3. If you have successfully preserved the data, the screen will be blank
after putting the new batteries in. Press any button on the clock to
activate it and resume play.
4. Once the power drops below a certain level, the "low battery" icon
will no longer appear. The unit will turn-off, and all data will be lost.
So please replace the batteries soon after seeing the indicator to
prevent this.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.