Setting Fan Switch - Honeywell T8112C Owner's Manual

Hold a temperature indefinitely—Press
Hold Temp key once. Press Temp keys
until display shows desired temperature.
Press Run Program key once to return to
the program.
Check Current Temperature Setting—Press
Run Program key once. If using Temporary
Change or Hold features, pressing this key
cancels your change.
Check Programs—Press Set Schedule key
repeatedly to see each time and tempera-
ture. Press Run Program key once to return
to the program.
Cancel a program—Press Set Schedule key
until the program to cancel shows. Pressing
the two Time keys together cancels the
program.
Permanently Change a program—Repeat the
steps in the Heating Program or Cooling
Program sections, as applicable.
Return to the normal program or the starting
program—Press Run Program key once.

Setting Fan Switch

Fan switching positions are:
Auto: Normal setting for most homes. A single-
speed fan turns on automatically with the air
conditioner or furnace. A two-speed fan
usually runs on high with the air conditioner
and runs on low with the furnace.
On: Fan runs continuously. Use for improved
air circulation during special occasions or for
more efficient electronic air cleaning.
8 69-0862—4