Dell PowerEdge C5125 Using Instructions page 15

Table 1-5. Blinking Fault LED Conditions
Index Sensor Name
CPU0_Temp,
1
Ambient0_Temp,
DIMM Local Temp,
Rear Temp 1
Rear Temp 2
Rear Temp 3
BMC Watchdog
2
Processor
3
BMC SEL
4
Processor Hot
5
POST Error
6
Critical Interrupt
7
DIMM-A0
8
DIMM-B0
DIMM-A1
DIMM-B1
SYS FAN 1 ~
9
SYS FAN 8
PSU 1 Status
10
PSU 2 Status
Event Triggers
• Upper Critical Going High.
• Upper Non-Critical Going High.
• Time expired
• Hard reset
• Power down
• Power cycle
Thermal trip
• SEL almost full
• SEL Full
State Asserted
System firmware error
PCI SERR
• Correctable error
• Uncorrectable error
• Correctable ECC error logging limit reached
• Lower critical going low
• Lower non-critical going low
• Presence detected
• TEMPERATURE Failure detected
• IOUT Failure detected
• VOUT Failure detected
• FANS Failure detected
• INPUT Failure detected
15