Buffalo HS-D1.0TGL User Manual page 31

Disk Management (RAID Configuration)
A configured RAID array may be deleted by pushing
the.Delete RAID Array button. This will free up all
hard.drives.listed.under.Disk.Structure.
.
.
To configure an unconfigured array, put checks
next to the hard disks you want included in
the.array.(under.Disk Structure).and.choose.
your.RAID mode...Click.Setup RAID Array.when.
ready. It may take several minutes to complete
setting up the RAID array. When it's finished, a
Disk Check.will.run.
1
Advanced Settings