Using Full Range Speakers; Power Amplifier - B&K PT3 Owner's Manual

USING FULL RANGE SPEAKERS

Connect the Preamplifier outputs to your external amplifier(s) or powered speakers.
Shown below is a typical Preamplifier output setup for use with large speakers
Note: the use of a sub woofer is optional.
POWERED
SUBWOOFER
RIGHT INPUT
RIGHT SPEAKER OUTPUT
MINUS PLUS
( - ) ( +)
Front Right
SUB output - Connect an RCA cable from the Preamplifier Tuner's SUB output. If your subwoofer does not
contain its own amplifier you will need to purchase an external B&K or other power amplifier. Connect the
Preamplifier Tuner's SUB output to the audio input of the external amplifier. Connect the external amplifier's
speaker output to your subwoofer. If you prefer to use your subwoofer's internal crossover, connect to the
Preamplifier Tuner's Mono output.
PREAMP OUTPUTS
MONO
L+R
or
SUB

Power Amplifier

9
:
HIGH FULL
PASS RANGE
LEFT INPUT
LEFT SPEAKER OUTPUT
MINUS PLUS
( - ) ( +)
Front Left