Re-Ordering Macro Steps - B&K CK2.2 Programming Manual

The Macro/Favorite Window-The Toolbar continued...
SAVE- Any macro programming you do will be discarded unless you press the
SAVE button.
DELAY- Opens the Delay window so that you can specify a delay in between
macro steps.
JUMP- Enables you to jump to any PAGE of any DEVICE at the end of a MACRO.
IR DATABASE- Enables you to drag any command to the macro from the B&K IR
Database.
INSERT- You must select the button you want the macro inserted in, click on the
INSERT button, then click on the button containing the macro you want copied. All of the
macro steps are inserted into the new button in one step. Make any changes you want to
the new macro, it is independent of the original (the original is not affected by any
changes you make, nor is the copy affected by changes you make in the original).
DELETE- You must select the first step you want deleted first, then click on
DELETE.

Re-ordering Macro Steps

You can simply drag and drop steps to any order once they are programmed. Just click
on if you want the changes you made SAVED.
CK 2.2 Keypad
Programming Manual
And
(BKC-DIP) RS232 Guide
Updated 08/13/07
Page 28 of 87