System Requirements; Specifications; Operating Environment - AIPTEK PenCam 2 Installation Manual

System Requirements

Microsoft Windows XP/ 98 / ME / 2000
Pentinum 200 MHz (or equivalent) processor or higher
32 MB of RAM (64 MB recommended)
Video card with 2 MB of RAM for minimum 16 bit (High Color) display
4X speed CD-ROM
An available USB port

Specifications

Sensor type
Iamge Performance for Video Stream
9 fps for QVGA(320x240 Pixels)
3 fps for VGA(640x480 Pixels)
Memory & Images
26 Picture for VGA
107Pictures for QVGA
Dimension
:5.6 " x1.35 "x1 "
Battery
: AAA1.5V x2 battery
Lens view angle
Interface type
Software Support

Operating Environment

The camera should be operated only within the following environmental
conditions:
41-104 Fahrenheit; 5-40 Celsius
20% - 85% relative humidity, non-condensing
PenCam Cautions!
Never immerse any part of the PenCam or its components into any fluid or liquid.
Disconnect the PenCam from your computer before cleaning it.
Remove dust or stains with a soft cloth dampened with water or neutral detergent.
Do not use any volatile chemicals or liquids such as thinner or benzene to clean the
PenCam.
Do not place hot items on the surface of the PenCam.
Do not attempt to disassemble the PenCam.
: Color VGA(640x480)CMOS image sensor
(SDRAM 64Mbit):
(640x480 Pixels)
(320x240 Pixels)
: 54 Degrees
: USB Port
: Microsoft Windows XP/ 98/ME/2000
:
,
.. 6 ..