Self Timer; Continuous Mode - AIPTEK PenCam 2 Installation Manual

Pressing the mode button until "St" appears in the LCD then pressing the
shutter button will start a 10 second self-timer. The camera will issue a short
beep every second and then a longer beep. The next beep indicates that the
picture has been taken. Note: The self-timer can not be selected when the
camera is full.
Pictures may be taken continuously as long as the shutter button is
pressed(and the camera is not full) as follows:
Press the mode button until the Ct appears in the LCD. Pressing the shutter
button within 5 seconds will cause the camera to start taking pictures for as
long as the shutter button is held down. If the shutter button is not pressed
within 5 seconds the camera will revert back to normal picture taking. Note:
During the continuous mode the camera will allow pictures to be taken with
incorrect exposure.

Self Timer

SW1
Switch mode to "St"
"St" will be displayed
Press SW1 to initiate the self-timer mode

Continuous mode

SW1
Switch mode to "Ct"
"Ct" will be displayed
Press SW1 to utilize Continuous mode
.. 9 ..
@ n I P C o m p a n y