AT&T E5827 User Manual page 37

Caller ID operation
Caller ID memory
• Press SELECT to edit the telephone number. You
can make any changes to the number by using
the CID then
ephone base and
handset to erase characters, or using the dial pad
to enter new ones (see pages 25-26 for instruc-
tions).
• To choose to assign a distinctive ring to an
entry, press SELECT. Press
choose Y (for yes) or N (for no). If you choose
yes (and if you have caller ID service), a differ-
ent ringing style will alert you when this person
calls (This step is for the cordless handset only).
• Press SELECT again and a long beep will sound
signal that the information has been stored in
the directory.
Deleting a number from the call summary
• Press CID on the telephone base or on the
cordless handset to activate the call summary.
• Press CID or DIR
on the cordless handset to scroll to the incom-
ing call entry to be deleted.
• When the desired record is displayed on the
screen, press
phone base (
set) to delete the entry.
NOTES:
. Deleting an incoming call record on the telephone base does
not automatically delete the same record from the cordless
handset. Likewise, deleting an incoming call record on the
cordless handset does not automatically delete the same
record from the telephone base.
2. When an entry is deleted, the next oldest record is displayed.
3. See page 33 for instructions on dialing a call summary entry.
34
/CID DEL on the tel-
INTERCOM
DELETE on the cordless
INT/
on the telephone base or
/CID DEL on the tele-
INTERCOM
DELETE on the cordless hand-
INT/
CID or DIR to