AT&T E5900B Quick Start Manual page 3

5.8 ghz cordless telephone/answering system with caller id & call waiting

Hide thumbs Also See for E5900B:

ATT-5900BQSG-d2.qxd

Installation and setup

Connect the base and install batteries as shown below. After installation, place the

handset in the base and allow the battery to charge for 12 hours before use. You can

keep the battery charged by returning the handset to the base after each use.

Press coin into slot on

base of handset to

release latch, then

remove battery cover.

Insert supplied

batteries.

Insert top tab first.

Connect charger as shown, then place handsets in base

and charger to charge for 12 hours before first use.

1/23/2004

5:21 PM

Page 3

Plug power cord

transformer into

electrical outlet.

Press down to

click in place.

Route cords through

slot in base.

Caution: Use only the supplied NiMH battery (80-

5461-00-00) or AT&T model 2AA NiMH replace-

ment battery (SKU 26820). Do not use alkaline

batteries.

Plug long telephone

line cord into

telephone jack.