Using The Flash (Flash Modes) - Nikon CoolPix S9300 Reference Manual

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can set a flash mode that suits the shooting conditions.
1
H m
Press (
2
Use the multi selector to select the desired
mode and press the
• See "Available Flash Modes" (A61) for more
information.
• If the k button is not pressed within a few seconds,
the selection will be canceled.
• When U (auto) is applied, D is only displayed for
a few seconds, regardless of Photo info settings
(A100).
3
Frame the subject and take a picture.
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On:
- Flashing:The flash is charging. The camera cannot
- Off:
• If the battery is low, the monitor will be turned off while
the flash is charging.
C
Effective Range of the Flash
The flash has a range of about 0.5 to 5.1 m (1 ft 8 in. to 16 ft) for wide-angle position, and about 1.5 to
3.0 m (5 ft to 9 ft 10 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).
60
flash mode) on the multi selector.
k
button.
The flash will fire when you press the
shutter-release button all the way.
take pictures.
The flash will not fire when a picture is
taken.
Auto