Asus P7Q57-M DO/CSM User Manual page 26

8. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
P7Q57-M DO Analog front panel connector
If you want to connect a high-definition front panel audio module to this connector, ensure
that the Front Panel Type item in the BIOS is set to [HD Audio]. If you want to connect an
AC97 front panel audio module to this connector, set the item to [AC97]. See section 2.5.3
Onboard Devices Configuration for details.
9. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the floppy disk drive (FDD) signal cable. Insert one end of the
cable to this connector, then connect the other end to the signal connector at the back
of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD
cable with a covered Pin 5.
P7Q57-M DO Floppy disk drive connector
1-16
AAFP
P7Q57-M DO
P7Q57-M DO
PIN 1 PIN 1
HD-audio-compliant Legacy AC'97
pin definition compliant definition
FLOPPY
PIN1
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
Chapter 1: Product introduction