Advertisement
Button Functions
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV CHAN may be called RECALL,
or ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV CHAN
ability for the PREV CHAN button to operate this
feature.
1.
2.
3.
4.
5.
6.
7.
8.
9.
16.
15.
14.
13.
12.
11.
10.
4
Button Functions, cont.
1. Red Indicator Lights when any button is pressed.
2. SD/HD - Sets the output to one of the Standard
(480i) or High Definition (720p, 1080i, etc.) formats.
3. CHANNEL UP/DOWN Changes the channels.
4. SLEEP Turns off the TV after a period of 1 to 99
minutes.
5. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
6. +100 Used for channels greater than 100.
(-) DASH Used for digital sub channels.
7. CODE SEARCH Used for setup.
8. CC TV Closed Caption (if your TV has this feature).
9.
ARC Aspect Ratio Control selects viewing format
for the displayed picture, e.g., Wide, Zoom, etc.
10. PREV. CHAN Returns to the previously selected
channel.
11. ENTER Used after direct channel number entry to
immediately change to the selected channel.
12. DISPLAY Displays on-screen info about current
channel being viewed.
13. MUTE Turns off the TV sound while the picture
remains.
14. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
15. SIGNAL/INPUT selects the viewing sources on
your device.
16. POWER Turns product On or Off.
Direct Code Entry
1. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
2. Enter the 4 digit code from the code table. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
3. With your device on, press CHANNEL UP. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
Write your code down here
for easy reference later.
5
Code
Advertisement
