RCA RCRP05BR Owner's Manual

Cable Replacement Remote
Navigation keys move the cursor in the program guide and
menu screens and navigate within the interactive service.
RCRP05B Universal Remote Control OK chooses options, PPV events, and tunes to programs
from the program guide.
Owner's Manual
GUIDE displays the program guide.
Manual del Propietario (parte posterior) EXIT leaves (or clears) your device's menu or guide.
DAY +/- moves a day forward (or back) on your device's
program guide.
Features and Functions PAGE +/- moves up or down one screen at a time through
Introduction
menu screens and the program guide.
The RCRP05B Cable Replacement Remote by RCA is our Use the illustration below to locate features on the A,B,C,D (red, green, yellow, blue) access additional
RCRP05B Cable Replacement Remote and then study the features on your cable box, satellite receiver, or Blu-ray disc
latest generation universal remote control. Its sophisticated
key descriptions below to learn how they function. player (see your device manual for details).
technology allows you to consolidate up to five of your
original home entertainment remote controls into one To find out what type of devices can be controlled by each VOL +/- raises (or lowers) the audio volume.
easy-to-use product. Moreover, its packed with advanced device key after programming, see the "Device Table"
ON DEMAND accesses your program provider's Video on
features such as:
section. Demand services. The ON DEMAND key may not work with
• Dedicated keys to control popular functions on your your program provider. Test the key, and if it doesn't take
TV, DVR/AUX, CBL/SAT,
DVR/PVR (Digital/Personal Video Recorder) you to your program provider's On Demand service, you can
DVD/VCR, and AUD select
program the ON DEMAND key to access the service. See the
• Programmable MASTER POWER key for master on/off a home entertainment
"Programming Macro Keys" section later in this manual for
control of your home entertainment equipment with a device to control. Also see
more information.
single keypress the "Device Table" section.
Each device key has an
CH+/- selects the next higher (or lower) channel. For DVD
• Programmable Macro Keys to consolidate multi-step
embedded LED (red light)
players, use these keys to skip forward (or reverse) through
actions into a single keypress
that blinks upon selection
chapters. For amplifiers/receivers, use these keys to select
• Channel Lock to lock channel selection only to the cable and indicates the remote the next higher (or lower) preset station.
box or satellite receiver control is working and (after
NOTE: By default, the CH+/- keys change channels on
programming) is sending
• Volume Lock to lock volume controls to one mode or the CBL/SAT device regardless of what mode you're
signals.
individual modes in. To change the way the CH+/- keys work, see the
"Programming Channel Control Lock" section.
• Code Search to help program control of older or NOTE: If you have a digital
discontinued components TV converter, you can MUTE turns the sound off or on.
program it to the CBL/SAT or
• Color-coded keys to quickly locate popular functions for FAV cycles through your favorite channels on your cable
DVR/AUX keys.
cable and satellite box or satellite receiver.
POWER/MASTER POWER
• Code library for popular video and audio devices LAST recalls the last channel.
turns on or off a home
Before using the product, you will need to install batteries Number keys (1-9, and 0) tune directly to channels (e.g.,
entertainment device. For
and also perform some programming to operate the 09). For amplifiers/receivers, use the keypad numbers to
MASTER POWER control, see
specific home entertainment devices you wish to control. select inputs 1 through 10.
the "Using the Master Power
Key" section. – accesses digital sub-channels (for example, 8.1 or 8.2).
SETUP is used in all ASPECT changes the aspect ratio of the show you are
programming sequences. watching. (Not available on all devices).
Installing Batteries
PIP turns the Picture-In-Picture feature on or off (if
LIVE commands your PVR/
available on your device).
DVR to return to watching
1. On the back of the remote control, push the tab and lift
live TV. SWAP switches PIP images and sound between the main
off the battery cover.
and window pictures.
LIST displays a list of
recorded shows on your PVR/ MOVE moves the PIP window to different positions on your
DVR. TV screen.
PIP CH +/- are used to select the next higher or lower
(replay) commands your
channel and is displayed on your PIP window.
PVR/DVR set-top box to
2. Insert two (2) AA batteries (not included). Match the +
instantly replay the last 7 INPUT in CBL/SAT mode is used to view other video sources
and - marks with those in the battery case, then insert seconds of a program you
(A or B). In other modes, use INPUT to switch between the
them. are watching.
source inputs on the device you are controlling.
3. Align the covers keys with the cases holes and press the MACRO1 and MACRO2 are reserved for use as macro keys
(skip
cover back into place. The tab should click when the (see the "Programming Macro Keys" section).
forward, reverse, play,
cover is locked.
forward, stop, pause,
Device Table
4. Test the remote control by pressing any mode key (e.g., record) In all modes
TV). If the batteries are inserted correctly, the LED (red except CBL/SAT, use these
NOTE: Please refer to the table below when performing
light) will blink once. keys to control a VCR, DVD
the instructions in the "Programming Device Control" or
player, or a PVR (after
"Setting Up a Combo Unit" sections.
NOTE: When batteries need replacement, the remote selecting a desired device).
After programming, the RCRP05B Cable Replacement Remote
control will cease to operate. Replace the batteries To record in DVD/VCR
will be able to control the following types of devices:
and the unit will be restored to its full functionality, mode, press twice. In CBL/
complete with your favorite settings. SAT mode, use these keys
TV Television
to control the DVR/PVR
Battery Precautions: functions of the cable box or
DVR/AUX DVR, PVR, or auxiliary TV, DVD player, VCR,
satellite receiver.
• Do not mix old and new batteries.
or digital TV converter
• Do not mix alkaline, standard (carbon-zinc) or
MENU displays the active
rechargeable (nickel-cadmium) batteries. CBL/SAT Cable box, satellite receiver, or digital TV
device's menu system.
• Always remove old, weak or worn-out batteries promptly converter
INFO displays the current
and recycle or dispose of them in accordance with Local
channel and program DVD/VCR DVD player, VCR, TV/VCR combo, or TV/DVD
and National Regulations.
information. combo
AUD Audio amplifier, tuner, or receiver
Programming Device Control 3. Use the codes in the accompanying code list to locate the NOTE: If a code digit is 0, the selected mode key will
brand name and enter the first four-digit code for your not blink.
combo device (for example, TV/VCR). If you perform this
Before you can start using this remote, you must program it 4. Repeat step 3 three more times for the remaining digits.
procedure correctly, the DVD/VCR key will blink twice.
to control your components. Use 2 for the second digit, 3 for the third digit, and 4 for
NOTE: If the DVD/VCR key did not blink twice after the fourth digit. Finish writing down the code in the TV
NOTES:
entering the codes last digit, repeat steps 2 and 3 and Code boxes.
The RCRP05B Cable Replacement Remote is preprogrammed try entering the same code again. If you've located
5. To check for other device codes, repeat steps 1 through 4,
to operate an RCA TV, a Toshiba DVD player, an RCA VCR, a setup code that works for your combo device (for
but substitute the appropriate key (e.g., DVD/VCR, DVR/
a Pioneer audio receiver, and a Motorola cable box. If you example, a TV/VCR Combo) and a separate TV code
AUX, AUD, or CBL/SAT) for the device you are checking.
own these brands of these devices, test the remote with is also listed, you'll need to program this code into
Write down the codes in the appropriate boxes in the
them. If they work, you do not have to program the remote the remote control to access volume control (see the
"Programming Device Control" section.
to operate them. "Programming Device Control" section).
For control of a Combo device (for example, a TV/VCR 4. Aim the remote control at your combo device (for Using Learning
combo), skip this section and perform the instructions example, TV/VCR Combo) and press POWER once. The
in the "Setting Up a Combo Unit" section. Also refer device should turn off. If it does not respond, repeat The RCRP05B Cable Replacement Remote includes a
to the "Device Table" to find out which devices can be steps 2 and 3, trying each code listed for your brand until
Learning feature so you can add functions that are unique
programmed onto each device key. you find one that works. If it still does not respond, try
to your home entertainment devices (e.g., VCR tracking up
searching for the code (see the "Searching for Your Code"
or down).
1. Turn on a device and, if applicable, insert video media, section).
Learning Precautions
(e.g., cassette or disc). 5. For future reference, write down each working device
code in the boxes below:
NOTE: Please read steps 2 through 5 completely before • Your original remote controls must be in working order
proceeding. Highlight or write down the codes and for learning to work properly.
TV/VCR or TV/DVD Code:
device you wish to program before moving on to step 2. • Learned keys are mode-specific, so each one can store a
TV Code (if used): unique function for each mode.
2. On the remote control, press a device key once (i.e., DVD/
• Do not use the following keys for learning: device keys,
VCR, DVR/AUX, AUD, TV, or CBL/SAT); it will blink once.
SETUP, (Record), Macro keys.
Searching For Your Code
3. Press and hold SETUP until the selected mode key blinks
• Learning capacity is up to a total of 50 keys, depending
twice, then release SETUP.
If your home entertainment device does not respond to the on the code being learned.
4. Use the codes in the accompanying code list to locate RCRP05B Cable Replacement Remote after trying all of the • Certain device functions are not learnable including
the type of device and brand name and then enter codes listed for your brand, or if your brand is not listed at multi-frequency types, some high frequency ones, and
the first four-digit code for your device. If performed all, try searching for your code. other unusual formats.
correctly, the selected mode key will blink twice. • For optimum learning, avoid high levels of ambient light
For example, to search for a code for your TV:
such as natural sunlight or energy-efficient fluorescent
NOTE: If the selected mode key emits a long blink, 1. Turn on your TV.
lights.
the entry is invalid. Repeat steps 2 through 4 and try 2. On the remote control, press TV once; it will blink once.
NOTE: Please have your original remote controls handy
entering the same code again. Then press and hold SETUP until the TV key blinks twice.
before programming learning.
3. Enter 9 9 1. The TV key will blink twice.
5. Aim the remote control at the device and press POWER
once. The device should turn off. If it does not, repeat 4. Aim the remote control at the TV and press POWER once. Programming a Learned Key
steps 2 through 4, trying each code for your brand until 5. Press and release the CH+ key continuously, then stop
NOTE: If more than 15 seconds pass between key
you find one that works. If it still does not respond, when the TV turns off.
try searching for the code (see the "Searching for Your presses, the remote exits programming.
NOTE: In the search mode, the remote control will send
Code" section).
IR codes from its library to the selected device, starting 1. Press and hold SETUP until the last-selected mode key
NOTE: If the device does not have a POWER key (e.g., with the most popular code first. blinks twice, then press 9 7 5.
DVD and VCR), press the (Play) key. 6. Press POWER. The TV should turn on, then press SETUP
NOTE: If the LED displays one long flash instead,
once to lock in the code. The LED will blink twice to
6. Once you've found a code that turns your device on and either your batteries are low, or the RCRP05B Cable
indicate that the code is saved.
off, test other remote commands for that device (e.g., Replacement Remote has a memory fault.
volume, channel, menu, etc.). NOTE: If the TV does not turn on during step 6, then
2. Press a mode key once (i.e., DVD/VCR, DVR/AUX, AUD,
slowly press and release CH- to go back through the
NOTE: By default, the CH+/- keys change channels on TV, or CBL/SAT) to assign a mode for learning.
codes, then press SETUP when the TV turns on.
the CBL/SAT device regardless of what mode you're in.
3. Press the desired key on the RCRP05B once to store the
7. Test other remote commands for the TV (e.g., volume,
So, you should only use these keys to test for CBL/SAT
feature to be learned.
menu, etc.). If the commands you want to use with your
device codes at this point.
TV work, you've finished programming for your TV. If 4. Place the RCRP05B Remote Control head-to-head (about
7. Repeat steps 1 through 6 for each device you want the
they don't, repeat steps 1-4 above. In step 5, don't stop 2" apart) from your original remote control. Also locate
remote control to operate. For future reference, write
when your TV turns off the first time—keep pressing the key (on your original remote control) that you want
down each working device code in the boxes below.
CH+ until it turns off again. the RCRP05B Cable Replacement Remote to learn.
NOTE: By default, the CH+/- keys change channels on
DVD/VCR Code:
the CBL/SAT device regardless of what mode you're in.
So, you should only use these keys to test for CBL/SAT
DVR/AUX Code:
device codes at this point.
AUD Code:
8. To search for the codes of your other devices, repeat steps
1 through 7, but substitute the appropriate key (e.g.,
CBL/SAT Code:
DVD/VCR, DVR/AUX, AUD, or CBL/SAT) for the device
TV Code: you're searching for.
5. On the original remote, press and hold the key to be
Checking the Codes
Setting Up a Combo Unit learned. The device key's LED will blink rapidly, then turn
off. Continue holding the key on the original remote
If you own a combo unit such as a TV/VCR Combo or a TV/ If you have set up your remote control by searching for your
until the device key LED blinks twice.
device code, you may need to find out which four-digit code
DVD Combo, you need to follow special steps to set it up.
is operating your equipment. NOTE: If the LED displays one long blink, a learning
Perform the following instructions to control combo device:
For example, to find out which code is operating your TV: error has occurred. Try repeating this step again until
1. For a TV/VCR Combo, turn on your TV/VCR Combo and
a successful capture occurs. If the function is still not
insert a video cassette. (For a TV/ DVD Combo, insert a 1. On the remote control, press TV once; it will blink once.
Then press and hold SETUP until the TV key blinks twice. captured, press and hold SETUP to exit programming and
DVD).
review the "Learning Precautions" earlier in this section. If
2. Enter 9 9 0. The TV key will blink twice.
2. On the remote control, press DVD/VCR once; it will blink
needed, also see "Troubleshooting" later in this manual.
3. To view the code for the first digit, press 1 once. Count
once. Then press and hold SETUP until the DVD/VCR key
After review, start programming again at step 1.
the number of times the TV key blinks (e.g., 3 blinks = 3)
blinks twice.
and write down the number in the left-most TV Code box
in the "Programming Device Control" section.
6. Repeat steps 2 through 5 for another mode and/or key DVR/AUX, TV, and CBL/SAT). This can be an advantage if, for Programming a Macro Key
or press and hold SETUP until the active mode key LED example, you always listen to home entertainment devices
1. On the remote control, press and hold the SETUP key
blinks twice to exit programming. through your receiver's speakers.
Deleting a Single Learning Key 2. Enter 9 9 5. The SETUP key blinks twice.
Unlocking Volume Control for a Single
3. Select a macro key (for example, MACRO1) and press it
This process returns the key to its original programming Device (Individual Volume Unlock)
for the mode you select. You can also delete learned
1. Assuming Global Volume Lock is active, select a mode on 4. Press the key sequence you want to program into
programming by teaching a different function to the key
the remote control that you want to unlock (e.g., CBL/
(see the "Programming a Learned Key" section)
SAT) and press it once. Next, press and hold SETUP until
NOTE: If more than 15 seconds pass between key
the device key blinks twice.
presses, the remote exits programming.
2. Enter 9 9 3. The last-selected device key will blink twice.
1. Press and hold SETUP until the last-selected mode key
3. Press VOL- once. The last-selected device key will blink
blinks twice, then press 9 7 6.
four times.
5. Press and hold SETUP until it blinks twice.
2. Press a mode key once (i.e., DVD/VCR, DVR/AUX, AUD,
4. Repeat steps 1 through 3 for each device you want 6. To add another macro, repeat steps 1 through 5,
TV, or CBL/SAT). The LED on the selected mode key will
volume to be unlocked.
blink once.
Now, after you select a device that has volume unlocked
3. Press the key containing the learned function to be
(e.g., CBL/SAT), pressing VOL+, VOL-,or MUTE, will control
deleted twice. The active mode key will blink twice.
only that device's volume.
4. Repeat steps 2 through 3 for another key or press and
Clearing a Macro Key
hold SETUP to exit programming.
Unlocking All Volume Control (Global
1. On the remote control, press and hold the SETUP key
Deleting All Learned Keys in a Specific Mode Volume Unlock)
2. Enter 9 9 5. The SETUP key blinks twice.
NOTE: If more than 15 seconds pass between key NOTE: Performing these instructions will set independent
3. Press once on the macro key you want to clear.
presses, the remote exits programming.
volume control for all programmed devices.
4. Press and hold SETUP until the active mode key blinks
1. Press and hold SETUP until the last-selected mode key
1. On the remote control, press and hold SETUP until the
blinks twice, then press 9 7 6.
last-selected device key blinks twice.
This macro key is now clear and ready for reprogramming
2. Press a mode key twice (i.e., DVD/VCR, DVR/AUX, AUD,
2. Enter 9 9 3. The last-selected device key will blink twice.
TV, or CBL/SAT) to clear all the learned keys for that (see "Programming a Macro Key" earlier in this section). If
mode. The mode key LED blinks twice. 3. Press VOL+ once. The last-selected device key will blink desired, repeat these to clear another Macro key.
four times.
3. Repeat step 2 for another mode or press and hold SETUP
to exit programming. Using The Master Power Key
Locking Volume Control To One Mode
(Global Volume Lock)
The RCRP05B Remote Control has a unique feature that
Programming Channel Control Lock
allows you to sequentially turn on or off up to five of your
NOTE: The audio mode's volume controls are active
home entertainment devices with a single key press.
By default, in TV mode the remote control's channel-control regardless of Volume Lock settings. However, if you lock
NOTE: MASTER POWER (POWER) only works in the CBL/SAT
capabilities are locked to the cable box or satellite receiver. the volume controls to the AUD mode, you will control the
The affected keys are 1 through 0, CH+, CH-, and LAST. mode. If it is not programmed, only the cable box or satellite
audio device's volume in all other modes (i.e., DVD/VCR,
This will guarantee that you do not inadvertently change receiver will turn on or off. In any other mode, pressing
DVR/AUX, TV, or CBL/SAT). This can be an advantage if, for
MASTER POWER (POWER) once will turn the selected device
a channel on your TV. However, you can deactivate this example, you always listen to home entertainment devices
on or off.
feature to allow full access to these keys in TV mode. through your receiver's speakers.
Unlocking Channel Control 1. On the remote control, press and hold SETUP until the Programming the Master Power Key
last-selected device key blinks twice.
1. On the remote control, press CBL/SAT once; it will blink 1. On the remote control, press and hold SETUP until the
2. Enter 9 9 3. The last-selected device key will blink twice.
once. Press and hold SETUP until the CBL/SAT key blinks
3. Select a mode (e.g., TV or AUD) which you want to use
twice. 2. Enter 9 9 5. The last-selected device key blinks twice.
to control the volume. The selected device key will blink
2. Enter 9 7 3. The CBL/SAT key will blink twice.
3. Press POWER once.
twice.
3. Press CH- once. The CBL/SAT key will blink four times. 4. For the first device you want in the power on sequence,
Now, when you press VOL+, VOL-,or MUTE, the volume
Now the remote control will provide TV and VCR channel-
of the selected device (e.g., TV) is controlled regardless of
control capabilities while in the TV or VCR mode.
mode.
Locking Channel Control to CBL/SAT
5. Repeat step 4 up to four more times to add the second,
1. On the remote control, press CBL/SAT once; it will blink
Programming Macro Keys
once. Press and hold SETUP until the CBL/SAT key blinks
twice. 6. To save the settings and exit the program:
The RCRP05B Cable Replacement Remote includes two
2. Enter 9 7 3.The CBL/SAT key will blink twice.
macro keys (located directly below the SWAP and MOVE
3. Press CH+ once. The CBL/SAT key will blink twice.
keys). Macro keys allow you to set up key macros to activate
Now, regardless of what mode you select (except AUD), the
certain keys in a specific order. For example, you can set up
2" Using the Master Power Key
channel keys will only change channels on your set-top box. a key macro to change the channels on your TV, raise or
lower the volume, and start recording on your VCR, all with 1. After programming, point the remote control at the
the touch of one key. If you want to change the macros
Changing Volume Lock
stored in a previously-programmed macro key, you'll need 2. Press POWER once to sequentially turn the programmed
Volume Lock allows you to control the volume through the
to clear the key first (see "Clearing a Macro Key" later in
device identified as having your primary speaker(s), regardless
this section). You will see the devices turn on or off according to the
of which mode you are using. On the RCRP05B Remote
programmed sequence.
Control, Global Volume Lock is set to TV, so you can control TV
Clearing the Master Power Key
volume while in the DVD/VCR, DVR/AUX, TV or CBL/SAT mode.
You can perform Individual Volume Unlock on a selected
1. On the remote control, press and hold SETUP until the
device to set its volume control for independent operation.
NOTE: The audio mode's (AUD) volume controls are active 2. Enter 9 9 5. The last-selected device key blinks twice.
regardless of Volume Lock settings. However, if you lock the 3. Press and release POWER.
volume controls to the AUD mode, you will have control of 4. Press and hold SETUP until the CBL/SAT key blinks twice.
the audio device's volume in all other modes (i.e., DVD/VCR,
Re-Assigning Device Keys Troubleshooting
Device key does not blink when you press a key.
The RCRP05B Cable Replacement Remote can be set up to
until it blinks twice.
Replace the batteries with two (2) new AA batteries (see
control a second device of an already-assigned type.
the "Installing Batteries" section).
For example, to have the unit control a TV, a set-top box,
and two audio devices (for example, two audio receivers),
once. Device key blinks when you press a key, but home
re-assign the unused DVD/VCR key to operate the second
entertainment device does not respond.
audio device as follows:
the macro. For example, to turn on your TV and raise Make sure you are aiming the remote control at your home
NOTE: Performing the steps below will overwrite the
its volume, press the TV mode key once, followed by entertainment device and that you are within 15 feet of the
pressing the VOL+ key once. device you've programmed for the device key. device you are trying to control.
1. On the remote control, press DVD/VCR once; it will blink
NOTE: You can program up to 15 key presses into one
once. Then press and hold SETUP until the DVD/VCR key The remote control does not control devices or
macro.
blinks twice. commands are not performing properly.
2. Enter 9 9 2. The DVD/VCR key will blink twice. Try all listed codes for the device brand being set up. Make
sure all devices can be operated with an infrared remote
3. Press AUD once, then press DVD/VCR once. The DVD/VCR
substituting the new key sequence to be added in step 4.
key will blink twice. control.
NOTE: Programming more than five macros on the
The DVD/VCR key is now ready to be programmed for
same macro key overwrites previous settings. TV/VCR Combo does not respond properly.
your second audio device. See the "Programming Device
Use the VCR codes for your brand. Some combo units may
Control" section. To re-assign other device keys, repeat
require both a TV code and a VCR code for full operation
these and substitute the key sequence using the following
(see the "Setting Up a Combo Unit"
chart:
until it blinks twice.
NOTE: Only one device can be assigned to an unused No volume on a second TV.
device key at a time. Follow instructions in the "Changing Volume Lock" section.
DVD/VCR as 2nd AUD key
(Play) and (Stop) keys do not work on a
DVD/VCR—>SETUP—>9—>9—>2—>AUD—>DVD/VCR
twice.
Motorola DCT-2000 cable converter.
DVD/VCR as 2nd TV key
Re-program the CBL/SAT key for cable code 0476 (see the
DVD/VCR—>SETUP—>9—>9—>2—>TV—>DVD/VCR
"Programming Device Control" section).
DVD/VCR as 2nd CBL/SAT key
Tried Search Method and still could not find a
DVD/VCR—>SETUP—>9–>9–>2–>CBL/SAT—>DVD/VCR
working code.
DVD/VCR back to DVD/VCR
Try the Search Method again after clearing out the device
DVD/VCR—>SETUP–>9–>9–>2–>DVD/VCR—>DVD/VCR
key as follows:
a. Press and hold SETUP until device key blinks twice.
To re-assign another unused device key, substitute it for the
b. Enter 9 9 2.
DVD/VCR key above and then perform the sequence. For
c. Press and release the device key to be cleared twice.
example, to re-assign an unused AUD key as a second DVD
key, perform: Remote control does not turn on Sony or Sharp
TV/VCR Combo.
AUD—>SETUP—>9—>9—>2—>DVD—>AUD.
When a re-assignment is done, the selected device key For power on, these products require programming TV
(e.g., AUD) will blink twice to confirm your choice. At that codes on the remote control. For Sony, use TV code 0000
and VCR code 0032. For Sharp, use TV code 0093 and VCR
time, you will need to program device control (see the
code 0048.
"Programming Device Control" section).
For more information, please visit
last-selected device key blinks twice.
www.rcaaccessories.com
Clearing Custom Programming
Consumer Help Line: 1-800-420-7968
The RCRP05B Remote Control contains a Custom
FCC Notice
press a device key (e.g., CBL/SAT) once. Then press
Programming Reset program. You can use it to remove
POWER once. For the second device in the power
all custom programming, except your setup codes and
This equipment has been tested and found to comply with the limits for a
sequence, press its key once (e.g, TV). Then press
reassigned device keys.
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
POWER.
designed to provide reasonable protection against harmful interference in
IMPORTANT: Executing this program will erase all custom
a residential installation. This equipment generates, uses and can radiate
third, fourth, and fifth device. settings for Volume Lock, learned keys, Macro keys, and radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Channel Lock. However, your device programming remains.
However, there is no guarantee that interference will not occur in a particular
1. On the remote control, press and hold SETUP until the
a. Press CBL/SAT once. installation. If this equipment does cause harmful interference to radio or
last-selected device key blinks twice. television reception, which can be determined by turning the equipment off
b. Press and hold SETUP until the CBL/SAT key blinks twice.
and on, the user is encouraged to try to correct the interference by one or
2. Enter 9 8 0. The last-selected device key blinks twice,
more of the following measures:
pauses, and blinks twice again to confirm that all custom
• Reorient or relocate the receiving antenna.
programming is cleared.
• Increase the separation between the equipment and receiver.
devices. Press CBL/SAT once. • Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
home entertainment devices on or off.
This equipment has been verified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and modifications made to the equipment without the approval
of manufacturer could void the user's authority to operate this equipment.
last-selected device key blinks twice.
This product is covered by one or more of the following U.S.
patents:
5,515,052, 6,014,092, 5,255,313, 5,414,761, 5,552,917,
6,097,309, 6,522,262, 5,568,367, 6,330,091, 6,701,091
Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry
immediately.
• Use and store the remote only in normal temperature
environments.
• Handle the remote gently and carefully. Don't drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to
keep it looking new.
• Modifying or tampering with the remote's internal
components can cause malfunction and invalidate its
warranty.
section).
Limited Lifetime Warranty
Audiovox Electronics Corporation (the "Company") warrants
to you the original retail purchaser of this product that should
it, under normal use and conditions, be proven defective in
material or workmanship during its lifetime while you own it,
such defect(s) will be repaired or replaced (at the Company's
option) without charge for parts and repair labor. To obtain
repair or replacement within the terms of this Warranty,
the product is to be delivered with proof of warranty
coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown
below. Do not return this product to the retailer.
This Warranty does not cover product purchased, serviced
or used outside the United States or Canada. This Warranty
is not transferable and does not extend to costs incurred for
installation, removal or reinstallation of the product. This
Warranty does not apply if in the Company's opinion, the
product has been damaged through alteration, improper
installation, mishandling, misuse, neglect, accident, or the
simultaneous use of different battery types (e.g. alkaline,
standard or rechargeable).
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or
liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed
herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of
incidental or consequential damage so the above limitations
or exclusions may not apply to you. This Warranty gives you
specific legal rights and you may also have other rights, which
vary from state/province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy
Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5
©2009 Audiovox Accessories Corporation
Trademark(s) ® Registered
RCRP05B US IB 01