Print Head Caution Symbol - Epson LQ-300+II User Manual

Unplug the printer and refer servicing to qualified personnel
under the following conditions:
i. If the power cord or plug is damaged.
ii. If liquid has entered the printer.
iii. If the printer has been dropped or the cabinet
damaged.
iv. If the printer does not operate normally or exhibits a
distinct change in performance.
Adjust only those controls that are covered by the operating
K
instructions.
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this printer, the building installation
must be protected by a 10- or 16-amp circuit breaker.
K

Print Head Caution Symbol

Printer parts marked with this symbol may be hot.
Turn off the printer and let it cool for a few minutes
before you touch any printer part marked with this
symbol.
This symbol is placed on the print head to indicate
that the print head may be hot. Never touch the
print head just after the printer has been used. Let
the print head cool for a few minutes before
touching it.
Getting to Know Your Printer
3