Edelbrock 2101 Installation Instructions page 2

Performer and performer rpm intake manifolds for small block chevrolet engines

page of 4

/ 4
Bookmarks

•

EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds are intended as a direct functionally identical replacement for their O.E.M.

counterparts. All exhaust emissions or emissions related stock components are intended to be retained and functional. Non-EGR equipped

manifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on some 1972 and later model vehicles

and only in some states. Check local laws for requirements. Manifolds not equpped with EGR are not legal for use on any emissions controlled

vehicle where such equipment is required.

•

ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. However, due to the variety of years, makes and models

to be covered, please review each part listed in the Installation Items section of the Edelbrock catalog to decide whether more items are

required for your specific vehicle than are mentioned in these instructions. See our catalog for details. To order a catalog, call (800) FUN-

TEAM, or visit www.edelbrock.com.

•

CARBURETOR RECOMMENDATIONS:

Manifold 2101, 3701 (Emissions Controlled Applications):

CARBURETOR

OEM 4BBL

Performer #1400 (600 cfm)

Manifold 2104, 3706 (Emissions Controlled Applications):

CARBURETOR

OEM 4BBL

Manifold 2101, 2104, 2116, 2716, 2601, 2604, 2701 (Non-Emissions):

CARBURETOR

Performer #1405 (600 cfm)

Performer #1406 (600 cfm)

Thunder Series #1805 (650 cfm)

Thunder Series #1806 (650 cfm)

Thunder Series #1825 (650 cfm)

Thunder Series #1826 (650 cfm)

Manifold 7101, 7104, 7116, 7501, 7516, 75013 (Non-Emissions):

CARBURETOR

Performer #1407 (750 cfm)

Performer #1412 (800 cfm)

Performer #1413 (800 cfm)

Thunder Series #1812 (800 cfm)

Thunder Series #1813 (800 cfm)

NOTES: Carburetor size (CFM) should be selected based on your specific engine combination. Consult your engine builder or

contact our Technical Hotline at: 1-800-416-8628 Monday - Friday, 7:00am to 5:00pm PST for assistance. Carburetors require a

#8008 or #8024 stud, washer and nut kit; determine proper length based on gasket thickness and your accessory mounting

requirements (See catalog for details). If a manual choke Performer Series Carburetor is used and electric choke is desired later on,

Performer Series carburetors can be converted to electric choke using Electric Choke Kit #1478. Manual choke Thunder Series

carburetors CAN NOT be converted to electric choke.

Catalog #2101, 2104, 2116, 2601, 2604, 2701, 2716,

3701, 3706, 7101, 7104, 7116, 7501, 7516, 75013

CHOKE TYPE

PARTS REQUIRED FOR INSTALLATION

OEM

#8036 throttle, cruise, & kickdown bracket for 1972-1979

Electric

#8036 throttle, cruise, & kickdown bracket for 1972-1979

CHOKE TYPE

PARTS REQUIRED FOR INSTALLATION

OEM

#8036 throttle, cruise, & kickdown bracket

CHOKE TYPE

PARTS REQUIRED FOR INSTALLATION

Manual