Sharp XG-PH80X-N Setup Manual page 29

Take the following steps for checking the network settings for the computer.
1. Open a command prompt.
• In the case of Windows
➔ "Command Prompt" in order.
• In the case of Windows
➔ "Accessories" ➔ "Command Prompt" in order.
2. After launching the command prompt, enter the command "ipconfi g", and press the "Enter"
key.
Note
• Communication may not be established even after carrying out the network settings
for the computer. In such cases, restart your computer.
C:\>ipconfi g
Note
• Usage examples of ipconfi g
C:\>ipconfi g /? displays how to use "ipconfi g.exe".
C:\>ipconfi g displays the set IP address, subnet mask and default gateway.
C:\>ipconfi g /all displays all the setting information related to TCP/IP.
3. To return to the Windows
2000: click "start" ➔ "Programs" ➔ "Accessories"
®
: click "start" ➔ "All Programs"
® XP, Windows Vista ®
®
screen, enter "exit" and press the "Enter" key.
Troubleshooting
-29