Adjusting The Projected Image; Adjusting The Projection Angle - ViewSonic PJD5126 User Manual

Adjusting the projected image

Adjusting the projection angle

• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes.
• Be careful when you press the adjuster button as it is close to the exhaust vent where hot
air comes from.
Auto-adjusting the image
Auto Sync
• The screen will be blank while AUTO is functioning.
• This function is only available when PC signal (analog RGB) is selected.
Fine-tuning the image clarity
28
1
2
AUTO
PJD5126/PJD5226/
PJD5226w/PJD6223/
PJD6253/PJD6553w
PJD6353/PJD6383/
PJD6653w/PJD6683w