If you are in a non-DHCP environment:
Mask Default Gateway
Enter
Menu
•
If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask,
Default Gateway, and DNS Server settings will display 0.0.0.0. Make sure the cables are
properly connected and perform the procedures above again.
•
If you wish to connect to the projector in its standby mode, be sure you have selected
RJ45 and obtained the Projector IP Address, Subnet Mask, Default Gateway, and DNS
Server information when the projector is on.
Controlling the projector through a web browser
•
If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
•
The screen shots in this manual are for reference only, and may differ from the actual
design.
3
4
5
Accessing to Network Settings or Email Alert page requires Administrator password. The
default password is "0000".
DHCP
DNS Server
MODE/ENTER
Apply
MODE/ENTER
40
Off
Projector IP Address Subnet
MODE/ENTER
Enter
MENU/EXIT
Enter