I/P Conversion; Audio Adjustments - Sharp XG-C40XUSL Operation Manual

Picture Adjustments
Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display

Audio Adjustments

Projector
1, 5
2, 3, 4
(GUI) On-screen Display
2
3
Remote control

I/P Conversion

This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smoother video image.
Interlaced mode
Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images.
Progressive mode
Progressive mode creates a single image using all available
scanning lines. Use this mode when projecting still images to
avoid flicker and stripes that result from interlaced source still
images.
Remote control This projector's audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
Description of Adjustment Items
• To reset all adjustment items, select "Reset" on the "Audio"
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Picture".
3 Press ∂/ƒ to select "I/P Conversion", and then
press ©.
4 Press ∂/ƒ to select "Interlaced" or "Progressive".
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Selected item ß button
Treble For weaker treble
Bass For weaker bass
Reset
All audio adjustment items are returned to the factory preset
settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU. Menu bar and "Picture" menu
screen appear. GUI operation guide is also
displayed.
2 Press ß/© to select "Audio".
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
menu screen and press ENTER.
MOUSE ADJ.
© button
For stronger treble
For stronger bass
MOUSE ADJ.
mark of the selected
E-30