Resetting The Picture Mode - BenQ W6000 - DLP Projector - HD 1080p User Manual

Setting the User 1/User 2/User 3 mode
There are three user-definable modes if the current available picture modes are not suitable for your need.
You can use one of the picture modes (except the selected User mode) as a starting point and customize the
settings.
1. In the Picture -- Basic menu, highlight Picture Mode and press
to select User 1, User 2, or User 3 mode.
2. Press to highlight Load Settings From.
This function is only available when User 1, User 2, or User 3
mode is selected up in the Picture Mode sub-menu item.
3. Press ENTER to display the Load Settings From page.
4. Press to highlight a picture mode that is closest to your need and
press ENTER and EXIT.
5. Press to select a sub-menu item to be changed and adjust the value
with / . See "Fine-tuning the picture quality" on page 28
"Advanced picture quality controls" on page 29
6. When all settings have been done, press MENU to save and leave the
settings.
Renaming user modes
You can change User 1, User 2, and User 3 to the names easy to be identified or understood by the users of
this projector. The new name can be up to 12 characters including English letters (A-Z, a-z), digits (0-9),
and space (_).
To rename user modes:
1. In the Picture -- Basic menu, highlight Rename User Mode and press ENTER to display the Rename
User Mode page.
2. Press / to highlight the item you want to rename and press ENTER. The first letter will be
highlighted by a white box.
3. Press / to select the first character.
4. Press to move along until the new name is set and press ENTER to confirm.
5. Repeat steps 2-4 if you want to change the other names.

Resetting the picture mode

All of the adjustments you've done in the Picture -- Basic and Picture -- Advanced menus can be returned
to the factory preset values with a key press on the highlight of Reset.
To reset the picture mode to the preset factory values:
1. In the Picture -- Basic menu, highlight Picture Mode and press
(including User 1, User 2, or User 3) you want to reset.
2. Press to highlight Reset Picture Settings and press ENTER. The confirmation message displays.
3. Press / to highlight Reset and press ENTER. The picture mode will return to the factory preset
settings.
4. Repeat steps 1-3 if you want to reset other picture modes.
Do not to be confused with the Reset Picture Settings function here with the Reset All Settings in the
Advanced Setup menu. The Reset All Settings function returns most of the settings to the factory preset
values system wide. See "Reset All Settings" on page 42
/
and
for details.
/ to select the picture mode
for details.
Picture -- Basic
Picture Mode User 1
Load Settings From
ENTER
Brightness +50
Contrast +50
Color
+50
Tint 0
Sharpness
+ 3
Reset Picture Settings
Rename User Mode
S-Video EXIT Back
Load Settings From
Cinema Mode ENTER
Dynamic Mode
Standard Mode
User 1
User 2
User 3
EXIT
Using the projector
Back
27