Setting Up Default Setting - Sanyo PLC XU115 - XGA LCD Projector Owner's Manual

Setting up default setting

The monitoring information and e-mail information can be set up by the procedure below.
1
Select System default setting from System menu. The setting window will appear.
2
Switch by clicking Monitoring information or E-mail information tab for each setting.
Monitoring information
Monitoring information
Items Description
Monitoring interval ................ Sets up the interval of the polling in minute unit. (1 to 99 minutes can be set)
Temperature unit Sets up the display temperature unit Centigrade or Fahrenheit.
.....................
Event reception process.......... Sets up the treatment when the event (ALERT, TRAP, SYSERR) happens on the target.
For further information, refer to the item "About event treatment" (+p.24).
p Sound warning alarm
p Send e-mail
p Display warning dialogue
Setting up default setting
PJ NETWORK MANAGER
OWNER'S MANUAL
15