Watching The Tv - Sony KP-61HS20 - 61" Projection Tv Service Manual

Watching the TV

Buttons for
Projection TV
Operations
Many TV features can be accessed directly through the remote control. The
following will explain the function of some buttons found on your remote
control.
1 TV (FUNCTION)
Activates the remote control for use with the projection TV.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input. (for
detailed connection information, see "Cable and Antenna" on page 16 or
"Cable Box Connections" on page 17)
3 TV (POWER)
Turns the projection TV on and off. If a video input indication (e.g., VIDEO
1, VIDEO 2) appears on the screen, press
channel number appears.
4 0-9 and ENTER
Use for direct channel selection. Press
to select channel 10, press
or you can press
ENTER
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected.
8 MUTING
Press to mute the sound. "MUTING" will appear on the screen and will dim
three seconds later. To restore sound, press again or press
9 FREEZE — (yellow labeled button)
This is useful when you need to copy down information that appears on the
TV's screen. (see "Using the Freeze Function" on page 44)
TV/VIDEO
to select a channel (for example,
0-9
1 and 0 ). The channel will change after 2 seconds,
for immediate selection.
Using the Features
or until a
CH +/ –
.
VOL +
(Continued)
37