Connecting A Digital Tv Receiver - Sony KP-61HS20 - 61" Projection Tv Service Manual

Installing and Connecting the Projection TV

Connecting a Digital TV Receiver

z
Be sure to read the
Set-top box manual.
Digital TV Set-top box
28
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
B
The Y, P and P
B
be connected to provide sound.
Component input (Y, P
picture quality. Component input is necessary to view 480p, 720p
and 1080i formats. You may also use component video or S VIDEO
connections.
2
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the projection TV's AUDIO IN jacks.
VMC-10HG (not supplied)
RK-74A (not supplied)
You cannot record the signal from any equipment connected into the
Y, P and P connectors.
B R
This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
and P jacks to the projection TV.
R
jacks do not provide audio, so audio cables must
R
and P ) is recommended for optimum
B R
AUDIO-R (red)
AUDIO-L (white)
P
R
P
B
Y
Rear of
projection TV