Status Read Command; Format; Transfer Example; Operation Requirements - Canon LV-8235 UST Specifications

Basic serial command specifications

Hide thumbs Also See for LV-8235 UST:

Table of Contents

Status Read Command

7.1.1.

PC issues commands in format as below;

"CR" Command [CR]

Command 1 character(See Basic Status Read Command Table)

7.1.2.

When a projector receives the appropriate command, it returns a character line as the

required data.

Required Data [CR]

Required Data A character line(See Basic Status Read Command Table)

7.1.3.

When the received data cannot be decoded, the projector returns "?" [CR].

Get input mode for projector with basic commands

PC → Projector

Projector → PC

Status read Commands are invalid when Eco mode is selected in Standby mode of Setting menu and

projector is in standby.

LV-8235 UST Basic Serial Command Specifications

Command (issues a command of getting current input mode)

"C" "R" "1" "CR"

(

Shows Computer 1 is selected)

-19-

"1"

"CR"

Processing

Response

(A few ms 1s)

Table of Contents