Alert Configuration; Custom Properties - Kyocera FS-2100DN User Manual

2
3
4

Alert Configuration

Creating a Custom Alert
1
2
3
4
5
Special Settings
Alert Details

Custom Properties

Setting Custom Properties
1
KMnet Admin 3.0
Under Enable Default, select the polling type you want to set. Status Polling,
Counter Polling, and Toner Level Polling are selected by default.
Under Default Interval, enter the default time within the range displayed under
Minimum Range and Maximum Range.
You can click Reset to display default settings. Click Apply.
KMnet Admin polls supported devices for status information that can be sent by
e-mail as alerts. Alert settings can be configured and customized.
Custom alerts can be set to notify you when the status of a device has changed.
In Device Manager, click Preferences > Alert configuration.
In the Custom Alert Sets list under Modify, select a name for the alert
(Custom 1 through Custom 4).
You can rename the custom list by clicking the Rename Alert Set icon in the
toolbar and typing a new name.
Select items in the Available Alerts list and use the arrows to move them to the
Selected Alerts list.
Click Apply.
Special Settings create alerts for maintenance based on page count and for
disconnected devices. For maintenance alerts, set the intervals for Minor,
Medium, and Major for page count levels. Intervals are based on the number of
pages printed.
Alert Details helps you identify the device properties that will be reported in
alert e-mails. The KMnet Admin server generates the alert using the top four
selected device properties as the e-mail subject line. The Selected Properties
list can be set in order using the up and down arrows. The device properties are
transferred between the lists with the left and right arrows.
The administrator can select custom device properties to appear in the
Properties dialog box. When custom properties are included, they appear as a
separate group under the Device Settings tab. Custom properties supports
select properties for connected Kyocera devices only.
You can assign custom properties to devices.
In Device Manager, click Preferences > Custom properties.
Device Manager
3-4