Download Print this page

Edelbrock 1472 Special Instructions

Edelbrock air-horn gaskets for performer series carburetors instructions manual

Advertisement

Quick Links

Trim the slots in the
gasket as needed.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
Trim the slots in the
gasket as needed.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
®
®
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
SPECIAL INSTRUCTIONS
©2006 Edelbrock Corporation
Brochure #63-0230
SPECIAL INSTRUCTIONS
©2006 Edelbrock Corporation
Brochure #63-0230

Advertisement

loading

This manual is also suitable for:

14771499