This is deactivated when a TV tuner box is installed.
5.
MagicInfo
This is activated when a network box is installed.
6.
TV
This is activated when a TV tuner box is installed.
7.
BNC
8.
Component
Note
•
The direct button on the remote control is the 'SOURCE' button.
Edit Name
MENU → ENTER → [Input] →
Name the input device connected to the input jacks to make your input source selection
easier.
VCR/DVD/Cable STB/HD STB/Satellite STB/AV Receiver/
DVD Receiver/Game/Camcorder/DVD Combo/DHR/PC
Note
•
When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC.
•
In other cases, set Edit Name to AV.
•
However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals
for AV and PC, make sure to set the Edit Name in accordance with the input signal.
•
The Picture menu changes depending on the input signal and Edit Name.
Adjusting the PDP Display
→ ENTER → [Edit Name] →
→ ENTER
,