Connecting A Computer - Samsung P63FP - 63" - Plasma Monitor User Manual

Connections

Connecting a Computer

Using a Power cord with Earth
• In the event of failure, the earth lead may cause electric shock. Make
sure to wire the earth lead in correctly, before connecting the AC power.
When un-wiring the earth lead, make sure to disconnect the AC power
in advance.
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can
be connected to the PDP Display. For detailed information on connecting AV input devices,
refer to the contents under Adjusting Your PDP Display.
Note
Please refer to below image which contains explanations based on 50 inch model.
(Only the terminal location is different between 50 inch and 63 inch models)
Connect the power cord for your PDP Display to the power port on the
back of the PDP Display. Turn on the power switch.
There are 3 ways to connect the D-sub to your PDP Display. Choose one
of the following:
• Connect the D-sub to the 15-pin, RGB port on the back of your PDP
Display and the 15 pin D-sub Port on the computer.
• Connect the DVI Cable to the DVI port on the back of your PDP Display
and the DVI port on the computer.
Using the D-sub (Analog) connector on the video card.
Using the DVI (Digital) connector on the video card.