1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster P64FP
  6. User manual

Samsung SyncMaster P64FP User Manual

Pdp displays
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SyncMaster P64FP P64FT
PDP Display

User Manual

The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster P64FP

Summary of Contents for Samsung SyncMaster P64FP

  • Page 1: User Manual

    SyncMaster P64FP P64FT PDP Display User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

  • Page 2: Safety Instructions

    Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.

  • Page 3: Installation

    Do not touch the power plug with wet hands when removing or plug- ging the plug into the outlet. • Make sure to connect the power cord to a grounded power outlet. • Ensure that the power plug is plugged into the power outlet firmly and correctly.
  • Page 4 Safety Instructions When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. • Otherwise, it may fall or cause personal injury. • Use a cabinet or rack of a size appropriate to the product. DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGA- RETTES AND ANY HEATING APPLIANCES NEAR THE PROD- UCT.
  • Page 5 Clean When cleaning the PDP Display case or the surface of the TFT-PDP screen, wipe with a slightly moistened, soft fabric.. Do not spray cleaner directly onto the surface of the product. • When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.
  • Page 6 Safety Instructions Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord.
  • Page 7 Safety Instructions Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. To avoid eyestrain, do not sit too close to the product.
  • Page 8 Safety Instructions When replacing the battery, insert it with the right polarity (+, -). • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time.
  • Page 9 Safety Instructions Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the product.

  • Page 10: Checking The Contents Of The Package

    Introduction Package Contents Note Please make sure the following items are included with your PDP Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the grooves on both sides of the package box.
  • Page 11 Others Remote Control Batteries (AAA X 2) (Not available in all loca- Options (P64FT Model Only) Pen battery charger USB Dongle Zigbee Touch Pen(IWB-P1) Samsung Interactive white- Introduction PDP Display Warranty Card User's Guide tions) D-Sub Cable Ferrite Core for Power Cord...
  • Page 12 Pen battery charger(IWB-C1), USB Dongle(IWB-D1), Zigbee Touch Pen(IWB-P1) only in P64FT model Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation.
  • Page 13 Sold separately HDMI Cable HDMI-DVI Cable Warning • The network box is not compatible with the Interactive Whiteboard program. Ferrite Core • • Your PDP Display Note The PDP device may interfere with an amateur radio or AM radio. Front SOURCE button [SOURCE] Switches from PC mode to Video mode.
  • Page 14 [PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [Component] → [BNC] Enter button [ ] Activates a highlighted menu item. Note • This product is not compatible with MagicInfo. MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.
  • Page 15 Introduction POWER IN The power cord plugs into the PDP Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB IN (PC Connection Terminal (Input)) • Use a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) •...
  • Page 16 Introduction • DVI, HDMI and network signals sent via the [DVI OUT] port are displayed on the second display which has the DVI IN port. AV IN [VIDEO] Connect the [AV IN (VIDEO)] terminal of your monitor to the video output terminal of the exter- nal device using a VIDEO cable.

  • Page 17: Remote Control

    Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the PDP Display , causing a malfunction due to interference with the frequency. Introduction • [G/P ] --> Blue port input •...
  • Page 18 POWER 3. Number Buttons / GUIDE button 5. - VOL + SOURCE D.MENU 8. TOOLS 9. Up-Down Left-Right buttons INFO 11. COLOR BUTTONS TTX/MIX Introduction EXIT MagicInfo Turns the product On. Turns the product Off. Used to enter the password during the OSD adjustment or to use MagicInfo.
  • Page 19 13. MTS/DUAL ENTER/PRE-CH MUTE CH/P 17. TV 18. MENU RETURN EXIT 21. MagicInfo Introduction Note - This button is disabled for this PDP display. MTS- You can select MTS (Multichannel Television Stereo) mode. Audio Type MTS/S_Mode FM Stereo Mono Mono Stereo Mono ↔...

  • Page 20: Tilt Angle And Rotation

    User Installation Guide Note • Be sure to call an installation expert of Samsung Electronics to install the product. • The warranty becomes invalid if the product is installed by someone other than a professional authorized by Samsung Electronics. •...

  • Page 21: Embedded Mount Guide

    When installing the product onto a vertical wall, be sure there is a 40 mm space or more behind the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details. 2. Embedded Mount guide <Side view>...

  • Page 22: Mechanical Layout

    • At least 2 persons are needed in order to move the PDP Display. • SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions * Unit: mm Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.

  • Page 23: Accessories (Sold Separately)

    • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.

  • Page 24: To Mount The Product On The Wall Bracket

    To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) Remove the 4 screws on the back of the product. Insert the screw B into the plastic hanger.

  • Page 25: Wall Bracket Angle Adjustment

    Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. Fix the product to the wall bracket. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.

  • Page 26: Cable Connections

    Remote Control (RS232C) Cable connections interface Bits rate Data Bits Parity Stop Bits Flow control Maximum length • Pin assignment • RS232C cable Connector : 9-pin D-Sub Cable : Cross (reversed) cable -P1- FEMALE Introduction RS232C(9 pin) TxD(No.2) RxD(No.3) GND(No.5) 9600 bps 8 bit None...

  • Page 27: Control Codes

    • Connecting method Control codes • Get control Header 0xAA • Set control Header command 0xAA command • commanding words - ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF. Introduction <--------- ---------- command command type DATA Length type...
  • Page 28 - Every communication will be made in hexadecimals and Checksum is the sum of all remainings. If it exceeds two digits,for example, it is 11+FF+01+01=112, discard the number in the first digit like below. example)PowerOn&ID=0 Header command 0xAA 0x11 Header command 0xAA 0x11...
  • Page 29 0xAA 0xFF ERR : Error code that shows what occurred error is • Volume Control • Function Personal Computer changes volume of TV or Monitor. • Get Volume Status Header command 0xAA 0x12 • Set Volume Header command 0xAA 0x12 Volume : Volume value code to be set on TV or Monitor (0 ~ 100) •...
  • Page 30 • Set Input Source Header command 0xAA 0x14 Input Source : Input Source code to be set on TV or Monitor 0x14 0x1E 0x18 0x0C 0x04 S-Video 0x08 Component 0x20 MagicInfo 0x1F DVI_VIDEO 0x30 RF(TV) 0x40 0x21 HDMI1 0x22 HDMI1_PC 0x23 HDMI2 0x24...
  • Page 31 • Screen Mode Control • Function Personal Computer changes "Screen Mode" of TV or Monitor Cannot be controlled when Video Wall is on. Caution Only works with models include TV. • Get Screen Mode Status Header command 0xAA 0x18 • Set Picture Size Header command...
  • Page 32 • Get Screen Size Status Header command 0xAA 0x19 • Header command 0xAA 0xFF Screen Size : Screen Size of TV or Monitor (Range : 0 ~ 255, Unit : Inch) • Header command 0xAA 0xFF ERR : Error code that shows what occurred error is •...
  • Page 33 PIP : Same as above • Header command 0xAA 0xFF ERR : Error code that shows what occurred error is • Auto Adjustment Control (PC, BNC Only) • Function Personal Computer controls PC system screen automatically. • Get Auto Adjustment Status None •...
  • Page 34 Does not operate in MagicInfo • Get Video Wall Mode Header command 0xAA 0x5C • Set Video Wall Mode Header command 0xAA 0x5C Video Wall Mode : Video Wall Mode code to be set on TV or Monitor 1 : Full 0 : Natural •...
  • Page 35 • Set Safety Lock Enable / Disable Header command 0xAA 0x5D Safety Lock : Lock code to be set on TV or Monitor 1 : ON 0 : OFF • Header command 0xAA 0xFF Safety Lock : Same as above •...

  • Page 36: Connecting A Computer

    Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [RGB IN] port on the back of your PDP Display and the 15 pin D-sub Port on the computer.
  • Page 37 Connections Using the HDMI (digital) output on the graphics card. • Connect the [HDMI IN] port on the PDP Display to the HDMI port on the PC using the HDMI cable. Note When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted.

  • Page 38: Connecting To A Pc

    PDP Display. . Note • Turn on both your computer and the PDP Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Using Whiteboard (P64FT Model Only) Note • Whiteboard does not support MagicInfo mode.

  • Page 39: Stylus Pen

    2. Components and Their Functions 2-1. Stylus pen Parts Pen tip IR sensor 2-2. Pen Battery Charger Parts Power in Stylus pen holders Connections Functions Enables the stylus pen when the sensor on it is pressed. Receives IR signals from the panel. Performs the right-click command.
  • Page 40 • If the LED remains green when you charge a pen battery (indicating fully charged) but the pen cannot power on, contact Samsung Customer Service Center. • Charging a pen battery may fail unless the pen is mounted in correct orientation on the holder.

  • Page 41: Activating Calibration

    • Press Pairing in the Samsung Interactive Whiteboard program. If No Pairing changes to Conneted, a pairing has been successfully performed and taps of the pen on the screen will im- mediately be recognized.

  • Page 42: Right-Click Function

    3-5. Adding Keyboard Commands to Pens Make better use of Whiteboard by adding keyboard commands to pens. Go to Pen Setting > Keyboard in the Samsung Interactive Whiteboard program. Select a button. When the key assignment window appears, press the keyboard key you want to assign.
  • Page 43 When you need to display the same still image for long hours, be sure to activate Screen saver at regular intervals. • It is best to activate Screen saver when the Samsung Interactive Whiteboard is not in use. • Using screen saver...

  • Page 44: Connecting To Other Devices

    It is recommended that you activate screen saver for a short period of time before you power off the PC. • Activation of Screen saver after the interactive whiteboard program is closed • If the PC is turned off: Screen saver will be active for a specified time before the PC powers of •...

  • Page 45: Connecting To A Camcorder

    Connect an audio cable to the audio output port on the external device and [AV/COMPONENT AUDIO IN[R-AUDIO-L]] port on the monitor, and connect the video output port on the external device to the [AV IN [VIDEO]] port on the monitor. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.

  • Page 46: Connecting The Bnc To Bnc Cable

    Connecting the BNC to BNC cable Connect the [BNC/COMPONENT IN [R/P on the external device using the BNC to BNC cable. Select BNC using the SOURCE button on the front of the PDP Display or on the remote control. Connecting Using a DVI Cable Connect between the [DVI OUT] port on the PDP Display and the input port on another monitor using a DVI cable.

  • Page 47: Connecting Using A Hdmi Cable

    Connecting Using a HDMI Cable Connect input devices such as a Blu-Ray/DVD player to the [HDMI IN] terminal of the PDP Display using an HDMI cable. Select HDMI using the SOURCE button on the front of the PDP Display or on the remote control. Note In HDMI mode, only PCM format audio is supported.

  • Page 48: Connecting A Dtv Set Top (Cable/Satellite) Box

    Note • Select Component for the connection to a DVD player using the SOURCE button on the front of the PDP Display or on the remote control. • Then, start the DVD Player with a DVD disc inserted. • A component cable is optional. •...

  • Page 49: Connecting To An Audio System

    Connections Connecting to an Audio System Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [AUDIO OUT] on PDP Display.

  • Page 50: Using The Software

    Click "Install" in the displayed "Ready to Install the Program" window. A window showing the installation progress will appear. Click "Finish" in the displayed "InstallShield Wizard Complete" window. 10. After the installation, the Samsung Interactive Whiteboard shortcut icon will be created on the desktop. MDC (Multiple Display Control) Installation Insert the installation CD into the CD-ROM drive.
  • Page 51 10. The MDC Unified shortcut icon will be created on the desktop after installation. Note • The MDC execution icon may not be displayed depending on the PC system or product spec- ifications. • Press F5 if the execution icon is not displayed. Uninstallation Select Settings >...
  • Page 60 † † † † † † †...
  • Page 61 † †...
  • Page 66 Full Natural...
  • Page 72 † † † † †...
  • Page 80 † †...

  • Page 83: Available Modes

    Adjusting the PDP Display Input Available Modes • PC / DVI / BNC • • HDMI • Component Source List Use to select PC, DVI or other external input sources connected to the PDP Display. Use to select the screen of your choice. HDMI MagicInfo - Enabled when a network box is connected.
  • Page 84 Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC Note •...

  • Page 85: Color Tone

    Entertain High brightness For watching motion pictures such as a DVD or VCR. Internet Medium brightness For working with a mixture of images such as texts and graphics. Text Normal brightness For documentations or works involving heavy text. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.

  • Page 86: Color Control

    The color tones can be changed. Cool Normal Warm Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled. If you set the Color Tone to Off, the Color Control function is disabled. Color Control Adjusts individual Red, Green, Blue color balance.

  • Page 87: Auto Adjustment

    Coarse Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

  • Page 88: Signal Control

    Selects either On or Off with the signal balance. Signal Control R-Gain G-Gain B-Gain R-Offset G-Offset B-Offset Size The Size can be switched. 16:9 Picture [ AV / HDMI / Component Mode] Available Modes • PC / DVI / BNC •...
  • Page 89 • Component Mode The PDP Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Cus- tom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. Dynamic Standard Movie Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. Contrast Adjusts the Contrast.
  • Page 90 Adds a natural tone to the display. Color Tone The color tones can be changed. The individual Color components are also user adjustable. Cool2 Cool1 Normal Warm1 Warm2 Note If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp function is disabled.

  • Page 91: Digital Nr (Digital Noise Reduction)

    Zoom 1 - Magnifies the size of the picture on the screen. Zoom 2 - Magnifies the size of the picture more than “Zoom 1”. 4:3 - Sets the picture to 4:3 normal mode. Just Scan - Displays the input scenes as they are without any cutoff when HDMI / Compo- nent 720p, 1080i, 1080p signals are input.
  • Page 92 Note • In HDMI mode, this function can be available when the input signal is interlaced scan; it cannot be available with progressive scan signal. Sound Available Modes • PC / DVI / BNC • • HDMI • Component Mode The PDP Display has a built-in high fidelity stereo amplifier.

  • Page 93: Auto Volume

    Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass Emphasizes low frequency audio. Treble Emphasizes high frequency audio. Balance Allows you to Adjusts the sound balance between the left and right speakers.

  • Page 94: Clock Set

    Setup Available Modes • PC / DVI / BNC • • HDMI • Component Language You can choose one of 13 languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.

  • Page 95: Sleep Timer

    Sleep Timer Turns the PDP Display off automatically at certain times. Timer1 / Timer2 / Timer3 You can set the PDP display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu. •...

  • Page 96: Menu Transparency

    You can register holidays. • Delete Selected You can delete selected holidays. Note • Only enabled when registered holidays are selected. • More than one holiday can be selected and deleted. • Delete All You can delete all the registered holidays. Menu Transparency Change the transparency of the background of the OSD.

  • Page 97: Energy Saving

    Safety Lock Change PIN The password can be changed. The preset password for the PDP Display is "0000". Note • If you forgot your password, press the remote buttons INFO + EXIT + MUTE to reset the password to "0000." Lock This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings.

  • Page 98: Hdmi Black Level

    HDMI Black Level When a DVD or set-top box is connected to your Product via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected.

  • Page 99: Screen Divider

    The Format can be selected to see a divided screen. Full Provides a full screen without any margins. Natural Displays a natural image with the original aspect ratio intact. Horizontal Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5.

  • Page 100: Safety Screen

    • The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. •...
  • Page 101 Five adjustment levels: 0, 1, 2, 3, and 4. Time Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.
  • Page 102 Period Use this function to set the execution period for each mode set in the timer. Time Within the set period of time specify a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec • Mode-All White, Pattern : 1, 5, 10, 20 30 min Scroll This function prevents after-images on the screen by moving all the pixels on the PDP according to a...

  • Page 103: Resolution Select

    This function prevents after-images on the screen by moving long black and white vertical lines. Eraser This function prevents after-images on the screen by moving a rectangular pattern. All White This function prevents after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

  • Page 104: Power On Adjustment

    60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz.

  • Page 105: Image Reset

    Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. Image Reset Note Available in PC mode only The Reset function is not available when Video Wall is On. Color Reset OSD Rotation OSD Rotate...
  • Page 106 Adjusting the PDP Display • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

  • Page 107: Troubleshooting

    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Turn off both your computer and the PDP Display. Unplug the video cable from the back of the computer. Turn on the PDP Display.

  • Page 108: Symptoms And Recommended Actions

    2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. Symptoms and Recommended Actions Note A PDP Display recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the PDP Display to become blank, have poor coloring, become noisy, and video mode not supported, etc.

  • Page 109: Problems Related To The Screen

    (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the PDP Display screen and their solutions are listed. The screen is blank and the power indicator is off. Ensure that the power cord is firmly connected and the PDP Display is on. (Refer to the Connecting a Computer) "Check Signal Cable"...

  • Page 110: Problems Related To Audio

    The color image is distorted by dark shadows. Adjust color using Custom under OSD Color Adjustment menu. The color white is poor. Adjust color using Custom under OSD Color Adjustment menu. The Power Indicator blinks. The PDP Display is currently saving the changes made to the settings to the OSD memory. The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
  • Page 111 Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity. Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used.

  • Page 112: Specifications

    Specifications General General Model Name PDP Panel Size Display Area Pixel Pitch Synchronization Horizontal Vertical Display Color 16.77M Resolution Optimum resolution Maximum resolution Maximum Pixel Clock 165MHz (Analog, Digital) Power Supply This product supports 100 - 240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product.
  • Page 113 A) and can be used in areas other than general households. [Recommendation] - EU Only (P64FT Model Only) Hereby, Samsung Electronics, declares that this [PDP Display] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (USA only) Dispose unwanted electronics through an approved recycler.

  • Page 114: Normal Operation

    State Power Consumption (Typical) Note • The actual power consumption may be different from the indicated power consumption if the system condition or settings are changed. • To stop any power consumption, disconnect the power cable on the back. Be sure to disconnect the power if you intend to stay away from home for many hours.
  • Page 115 Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the...

  • Page 116: For Better Display

    Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for PDP. •...
  • Page 117 Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. •...
  • Page 118 • Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. • All area display Moving image together with Logo periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use.
  • Page 119 Note Please check CD's User Guide at "OSD Function", some model's will not available. Apply the Screen Erasing function on Product • Apply the Screen Erasing function - Symptom: 2 Vertical blocks move with erasing the display Note Please check CD's User Guide at "OSD Function", some model's will not available. Information...

  • Page 120: Contact Samsung Worldwide

    Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A CANADA MEXICO ARGENTINA BRAZIL BOLIVIA CHILE COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA...
  • Page 121 From landline & mobile : (+40) 21 206 01 10 SERBIA 0700 SAMSUNG (0700 726 7864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) SPAIN 902 - 1 - SAMSUNG (902 172 678) SWEDEN 0771 726 7864 (SAMSUNG) SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) Appendix Europe http://www.samsung.com/be_fr...
  • Page 122 8-10-800-500-55-500 MONGOLIA UKRAINE 0-800-502-000 BELARUS 810-800-500-55-500 MOLDOVA 00-800-500-55-500 AUSTRALIA 1300 362 603 NEW ZEALAND 0800 SAMSUNG (0800 726 786) CHINA 400-810-5858 HONG KONG (852) 3698 - 4698 INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 INDONESIA...
  • Page 123 TANZANIA UGANDA Terms Dot Pitch Appendix Asia Pacific 1-800-10-SAMSUNG http://www.samsung.com (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 1800-SAMSUNG (726-7864) http://www.samsung.com 1800-29-3232 http://www.samsung.com 02-689-3232 0800-329-999 http://www.samsung.com 0266-026-066 1 800 588 889 http://www.samsung.com Middle East 021-8255 http://www.samsung.com 800-SAMSUNG (726-7864) http://www.samsung.com...

  • Page 124: Multiple Display Control (Mdc)

    Vertical Frequency Horizontal Frequency Interlace Non-Interlace Methods Plug & Play Resolution SRS TS XT Multiple Display (MDC) Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
  • Page 125 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or con- sequential damages in connection with the furnishing, performance, or use of this material.

This manual is also suitable for:

Syncmaster p64ft

Table of Contents