Toner Remaining; T/C Change - Konica Minolta magicolor 1690MF User Manual

TONER REMAINING

A general estimate of the amount of toner remaining in the toner cartridges
can be viewed.
If the Select key is held down for at least 2 seconds while the screen
described above is displayed, the configuration page will be printed.

T/C CHANGE

REPLACE MODE
EJECT MODE
Checking the Machine Status and Settings
Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner car-
tridge.
For details on replacing a toner cartridge, refer
to "Replacing a Toner Cartridge" on page 7-5.
To return to normal operation mode from
REPLACE MODE, press the Stop/Reset
key.
Switches the machine to the EJECT MODE.
This mode is used when removing all toner car-
tridges.
For details on removing all toner cartridges,
refer to "Removing All Toner Cartridges" on
page 7-11.
To return to normal operation mode from
EJECT MODE, press the Stop/Reset
key.
2-15