GE JKP30BMBB Installation Instructions Manual page 11

Installation Instructions
Cutout for 30"
A
only Under Counter
For JTP30, JTP70, PT916, PT920, ZET938 models only.
Gas or electric cooktops may be installed over this oven. See
cooktop installation instructions for cutout size. See label on
top of oven for approved cooktop models.
25" (63.5 cm)
Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
3/4" (1.9 cm)
Support Platform
Required
MUST SUPPORT 150 LBS. (68 Kg)
Side by Side Installations
Install two wall ovens in separate cutouts.
Allow 2" (5.1 cm) min. between cutouts
(PT920 models) or 6" (15.2 cm) min.
between cutouts (all other models).
(76.2 cm)
28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
27 1/4" (69.2 cm) Min.
27 5/16" (69.4 cm) Max.
11
Single Built-In Ovens
240V / 208V
Junction Box
Location (junction
box may be in
adjacent cabinet)
7 3/4"
(19.7 cm)
Max.
Allow 1" (2.5 cm)
overlap top
of oven,
11/16" (1.8 cm)
overlap side edges
of cutout and
1 1/4" (3.2 cm)
overlap bottom
of oven.
Must
match
NOTE: This oven is not ap-
toekick
proved to be installed under a
height
solid disk, induction or
downdraft modular cooktop.
2" (5.1 cm )
Cutout –
Min. (PT920)
Observe all
dimensions dimensions
or
and
6" (15.2 cm ) Min.
requirements. requirements.
(other models)
Gas and electrical connections
for 30" (76.2 cm) gas cooktop must
be located in an adjacent accessible
location to the right. For 36" (91.4 cm)
gas cooktop, the connections may be
made to the left.
36" (91.4 cm)
22" (55.9 cm) Min.
Typical
Above Support
Countertop
Platform
Height
24" (61 cm)
4" (10.2 cm)
Typical
Toekick
Cutout –
Observe all
and