Hardware Issues - Dynex DX-E202 Faq

Hardware Issues

5. My computer isn't recognizing the Network Card.
Check the Device Manager to see if the device exists.
o
1. Click the Start button and right-click My Computer (Windows 2000 & XP) or Computer
2. Click Device Manager.
3. Double-click Network adapters to display the list of network adapters. You should see Dynex
Repeat the device driver installation procedures.
o
6. How do I safely remove the device from my computer?

Double-click the Safely Remove Hardware icon on the toolbar (System Tray) in the lower right corner of
your screen. When the window opens, select the device you wish to remove. A window should open
which tells you it is now safe to remove the device.
General
7. Is this Network card compatible with my computer?

The following are compatible operating systems:
o
o
o
o
o
8. Can I get more information about this Network card?

You can find more information about this card in your User Guide or on the Dynex Website:
http://www.dynexproducts.com/products/computers/DX-E202.html
(Windows Vista & 7), then select Properties.
DX-E202 CardBus 10/100Mb Network Adapter.
 If you see a yellow exclamation point or red 'X' over the icon adjacent to Dynex DX-E202
CardBus 10/100Mb Network Adapter your network card is not installed correctly or may
have a problem. Double-click Dynex DX-E202 CardBus 10/100Mb Network Adapter to
read the explanation of the problem.
Windows 2000
Windows XP
Windows Vista
Windows 7
Mac OS Xv10.4.0 or higher
4