Connecting Devices To The Xav5004 - NETGEAR XAV5004 - POWERLINE AV 500 ADAPTER User Manual

XAV5004 Powerline AV 500 Adapter User Manual

Connecting Devices to the XAV5004

You can connect multimedia devices, such as media servers, storage devices, gaming
consoles, video players, or internet telephones to the four Ethernet ports on the XAV5004.
When you are connecting peripheral devices to the XAV5004, keep in mind how the devices
will be used so that each device has the appropriate Quality of Service (QoS) priority (see
Set Up Quality of Service (QoS)
To connect devices to your XAV5004, follow these steps:
1. Use an Ethernet cable to connect each peripheral device to an Ethernet port on the
XAV5004. One Ethernet cable is provided with your XAV5004.
Figure 4. Connecting devices to an XAV5004 Powerline adapter
2. When all peripheral devices are connected, connect the XAV5004 power cord into the unit
and into a power outlet.
3. Wait up to 80 seconds for the XAV5004 to be recognized by the Powerline network. Check
to see that:
a. The Power LED is solid green.
b. The Powerline LED is lit.
c. The Ethernet LED is on or blinks.
on page 16).
Chapter 1. Installation and Basic Configuration | 9