Eclipse E-iSERV CD7200 mkII Operation Manual page 5

Upload the analyzed frequency characteristic data to the E-iSERV website, and make
2 2
adjustment on the website. For details of the operation, see the HELP page on the
website.
3 3
Load the adjusted data from the USB memory to the unit.
For details of the operation, see 'Importing Sound Data (Sound Data)' in the Owner's
Manual.
ATTENTION
<When using a USB memory drive>
• Data downloaded from the E-iSERV website should be saved to folders created in the USB drive
as shown below (NOTE: in order for the system to properly recognize and load audio customization
data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
DATA
208 X 00 .eis
• Files retrieved from the E-iSERV website are automatically generated fi lenames upon
download.
<When using a CD-R>
• The main unit can only import fi les located in the root directory of the CD-R.
208 X 00 .eis
*
File extension
Two digit number
Adjustment pattern
Adjustment mode
(a: 3 Way d: 4 speaker)
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• The loading process may take longer if the CD-R contains unrelated data in addition to
the audio customization fi les to be imported.
Must be created by user
Automatically generated filename
*
File extension
Two digit number
Adjustment pattern
Adjustment mode
(a: 3 Way d: 4 Speaker)
Automatically generated filename