Security Pin Entry - NETGEAR WNR1000v2 - Wireless- N Router User Manual

The green light on the WNR1000v2 router begins to blink in a regular pattern. While the
button light is blinking, you have 2 minutes to enable WPS on the device you are trying to
connect to the router.
5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The WNR1000v2 router's green
conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, no WPS security settings will be specified in the WNR1000v2 router.

Security PIN Entry

There are two ways to enable a wireless client to join a network using a PIN: using the router's
security PIN or using the wireless client's security PIN.
Using the Router's Security PIN
1. Obtain your router's security PIN from the rear panel of the router or from the Advanced
Wireless Settings screen.
2. On the wireless client, follow its specific networking instructions to enter the router's security
PIN and to establish a wireless connection with the router.
Using the Wireless Client's Security PIN
1. Log in to the router as described in
2. Select Add WPS Client in the main menu, and click Next.
3. Select the PIN Number setup method.
Safeguarding Your Network
Wireless-N 150 Router WNR1000v2 User Manual
light ceases blinking and remains on when one of these
"Logging In To Your Wireless Router" on page
v1.0, September 2009
1-2.
2-15