Advanced Wireless Settings - NETGEAR WNDRMAC User Manual

Advanced Wireless Settings

Select Advanced > Advanced Setup > Wireless Settings to display the following screen:
The following settings are available in this screen:
Enable Wireless Router Radio. You can completely turn off the wireless portion of the
wireless router by clearing this check box. Select this check box again to enable the wireless
portion of the router. When the wireless radio is disabled, other members of your household
can use the router by connecting their computers to the router with an Ethernet cable.
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Note:
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Transmit Power Control. With the default setting of 100%, the router uses the power level
that NETGEAR recommends to transmit wireless packets. If you change this setting to a
lower percentage, it saves power, but also reduces wireless coverages.
Turn off wireless signal by schedule. You can use this feature to turn off the wireless signal
from your router at times when you do not need a wireless connection. For instance, you
could turn it off for the weekend if you leave town.
WPS Settings.You can add WPS devices to your network.
Wireless Card Access List. Click the Set Up Access List button display the Wireless Card
Access List screen. On this screen you can restrict access to your network to specific devices
based on their MAC address.
N600 Wireless Dual Band Gigabit Router WNDRMAC
Advanced Settings
73