Installing The Battery And Storage Card - HTC Snap Quick Start Manual

6 Quick Start Guide

4. Installing the Battery and Storage Card

You need to remove the back cover before you can install the battery or storage card. Also,
make sure to always turn off the power before installing or replacing the battery.
Note
Your Global Phone accommodates a GSM SIM card for global coverage. Refer to the User
Manual for instructions on inserting a SIM card.
To remove the back cover
1.
Hold the device securely with both hands and
the front facing down.
2.
Push the back cover up with your thumb until it
disengages from the phone and then slide it up
to remove.
Storage Card
To have additional storage for your images, videos, music, and files, you can purchase a
microSD™ card and install it into your device.
To install the microSD card
1.
Remove the back cover.
2.
Insert the microSD card into the slot with its
gold contacts facing down until it clicks into
place. Refer to the illustration above the SIM
card slot for the correct orientation.
Note
To remove the microSD card, press it to eject it
from the slot.