Table of Contents
Advertisement
General
•
It is important to clean the product
regularly as a build up of fat can af-
fect its performance or damage it and
may invalidate your guarantee.
•
Always switch off your appliance
and allow it to cool down before you
clean any part of it.
•
do not use undiluted bleaches,
products containing chlorides, wire
wool or abrasive cleaners on alu-
minium, stainless steel, or plastic/
painted parts as they can damage
the appliance. Nylon pads can also be
unsuitable.
•
Take extra care when cleaning over
symbols on fascia panels. Excessive
cleaning can lead to the symbols
fading.
•
If your product is fitted with stainless
steel cladded stips. You may notice
a small white residue on the outer
edges, this can be removed with a
non abrasive wipe.
painted & plastic parts
•
only use a clean cloth wrung out in
hot soapy water.
•
do not use abrasive cleaners, wire or
nylon cleaning pads on these parts.
stainless steel & aluminium surfaces
•
only use a clean cloth wrung out in
hot soapy water, and dry with a soft
cloth.
•
Stubborn marks can be removed us-
ing a stainless steel cleaner. Supplies
can be purchased from the customer
care centre.
•
Sharp objects can mark the surface
of stainless steel, but will become
less noticeable with time.
•
Wipe any spillage immediately, taking
care to avoid burning your hands
cleanInG
•
Some foods are corrosive eg; vinegar,
fruit juices and especially salt - they
can mark or damage the metal if they
are left on the surface.
•
Baby oil can be used to restore stain-
less steel finishes - but only use a
few drops. don't use cooking oils
as they can contain salts, which will
damage the metal.
• do not use steam cleaners.
enamel surfaces & parts
•
clean with warm, soapy water and a
clean cloth.
•
If larger splashes of fat do not readily
disappear, you can use a mild cream
cleaner to remove them. More stub-
born marks can be removed using a
soap filled pad.
•
rinse well and dry with a soft clean
towel or cloth.
•
do not use steam cleaners.
Glass parts
WaRnInG:- do not use harsh
abrasive cleaners or sharp
metal scrapers to clean the
oven door glass since they can
scratch the surface, which may
result in shattering of the glass.
•
only use a clean cloth wrung out in
hot soapy water, or a specialist glass
cleaner.
rinse away any excess cleaner and dry
with a soft cloth.
chrome plated parts
•
Use a moist soap filled pad, or place
in a dishwasher
Hide quick links:
Advertisement
Table of Contents
