Get Started; Power Supply - Philips SBA3110/37 User Manual

Note
•
The type plate is located on the bottom of the apparatus.
2

Get started

Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus. The model number and serial number are on the
bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Power supply

The speaker can operate on built-in rechargeable battery.
To recharge the built-in battery:
Connect your speaker with PC through supplied USB cable.
The power indicator turns on.
»
•
The power indicator turns off when it's fully charged.
Play
1 Pull the audio input plug out of the speaker.
2 Slide the switch to turn the speaker on.
» The LED lights up.
3 Connect the speaker to your device with the audio input plug.
4 Adjust the volume and navigate your audio content on your device.
5 After use,disconnect your device from the speaker and slide the
switch to turn the speaker off.