Get Started; Check The Battery Level; Charge The Built-In Battery - Philips SB500 User Manual

3 Get started

Always follow the instructions in this
chapter in sequence.

Check the battery level

The speaker is powered by the built-in
rechargeable battery.
•
To check the battery level, press
» The different behavior of the five
LEDs indicates different battery
levels.
LED indication:
LED 5
LED 3
LED 1
Battery LED 1 LED 2 LED 3 LED 4 LED 5
power
Full Solid green
> 80% Solid green
60% - Solid green
80%
40% - Solid green
60%
20% - Solid Off
40% green
Low Flash Off
battery red
(<20%)
.
LED 4
LED 2
Off
Off
Off
Charge the built-in
battery
Note
•
It takes you approximately 3.5 hours to fully
charge the battery.
•
The micro USB socket is for charging only.
•
Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
When the battery level is low, LED
3 flashes red as illustrated. To turn off
the low power indication, press
LED 5
LED 3
LED 1
To charge the built-in battery:
•
Connect the speaker to AC
power by using a power adaptor
(not supplied; 5V 2.1A adaptor
recommended).
.
LED 4
LED 2
5
EN