Combination Of Cutting Heads, Shields, Handles, Etc - Echo GRASS/WEED TRIMMER BRUSHCUTTER and CLEARING SAW Safety Manual

COMBINATIONS OF CUTTING
HEADS, SHIELDS, HANDLES, ETC...
PLASTIC DEBRIS SHIELD
FOR CURVED SHAFT UNITS
CUT-OFF KNIFE
ON RIGHT SIDE
BASIC COMPONENTS AVAILABLE FOR METAL BLADE USE
REVIEW THE OPERATOR'S MANUAL FOR PROPER PROCEDURE WHEN CONVERTING FROM NYLON LINE HEAD TO
1. IF UNIT HAS A PLASTIC DEBRIS SHIELD,
REPLACE WITH METAL BLADE SHIELD. SEE
OPERATOR'S MANUAL.
3. SELECT AND INSTALL THE BLADE
OF YOUR CHOICE.*
BLADE MUST BE RETAINED
WITH A NEW COTTER PIN
EACH TIME INSTALLED.
* CHECK DEALER FOR NEW CUTTING BLADES
OR HARNESSES WHICH MAY BE INTRO-
DUCED FROM TIME TO TIME
PLASTIC DEBRIS SHIELD
WHEN PROVIDED FOR
STRAIGHT SHAFT UNITS
DEBRIS SHIELDS FOR NYLON LINE HEADS
BLADE APPLICATION
2. IF UNIT HAS A D-HANDLE, REPLACE
WITH A BAR OR U-HANDLE
WARNING
DO NOT INSTALL
A METAL BLADE
ON A GT UNIT.
BAR HANDLE
4. INSTALL THE SHOULDER/
WAIST HARNESS.
DANGER
CUT-OFF KNIFE
ON LEFT SIDE
U-HANDLE
9